JVC CA-MXJ880V, CA-MXJ770V manual Using the Timers, Using Daily Timer

Using the Timers

English

There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.

Before using the timers, you need to set the unit's built-in clock. (See page 9.)

Using Daily Timer

With Daily Timer, you can wake up to your favorite music or radio program.

How Daily Timer works

The unit automatically turns on, sets the volume level to the preset level, and starts playing the specified source at the turn-on time (the indicator flashes just before the turn-on- time, and continues flashing while the timer is operating). Then, at the turn-off time (“OFF” flashes just before the turn- off-time), the unit automatically turns off (stands by).

The timer setting remains in memory until you change it.

•There is a time limit for performing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting timer, press CANCEL. (However, this does not always work. If CANCEL does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)

Before you start...

•When using a CD as the source to play, make sure there is a CD in the selected tray.

•When using a tape as the source to play —

–Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.

–Make sure that the tape direction is correct.

•When using an external component as the source to play, set the timer of the external component at the same time.

On the unit ONLY:

1 Press CLOCK/TIMER until “DAILY” appears on the display.

The DAILY (Daily Timer) indicator also starts flashing on the display.

•Each time you press the button, the timer setting modes change as follows:

DAILY ON TIME REC

Canceled Clock ON TIME setting

(See page 9.)

2 Press CLOCK/TIMER again.

“ON TIME” appears for 2 seconds, then the unit enters turn-on-time setting mode.

3 Set the turn-on-time.

1) Press 4 or ¢ to set the hour, then	PREV	NEXT
press SET.

2)Press 4 or ¢ to set the minute, then press SET.

“OFF TIME” appears for 2 seconds, then the unit enters turn-off-time setting mode.

4 Set the turn-off-time.

1) Press 4 or ¢ to set the hour, then

PREVNEXT

press SET.

2)Press 4 or ¢ to set the minute, then press SET.

The unit enters source selecting mode.

5 Press 4 or ¢ to select the

PREVNEXT

source to play, then press SET.

•Each time you press 4 or ¢, the source changes as follows:

TUNER FM TUNER AM

AUX TAPE – CD – –

TUNER FM: tunes into a specified preset FM station. = go to step 6.

TUNER AM: tunes into a specified preset AM station.

=go to step 6.

– CD – –: plays a track of a specified disc. = go to step 6.

TAPE: plays a tape in deck A or B. = go to step 7.

AUX: plays an external source. = go to step 7.

– 26 –