Playing Back Video CDs/SVCDs
English
Selecting Video Output (PAL, MULTI, NTSC)
Video output is preset for PAL.
To playback images correctly on your TV, select the video output according to your TV system, select the proper video output using the buttons on the Unit before you play a disc.
1 At standby mode.
2 | 3 |
Press a disc number button for |
more than 2 sec. | 2 |
|
3 Press 0 to close the tray.
“CD CLOSE” appears on the display.
4 Repeat steps 1 to 3 to place other discs onto the other trays.
To continue putting discs onto other trays, even if a tray is open, by pressing the 0 button of another disc tray, the open tray will close automatically, and the new tray will slide out.
CD3 | for NTSC exclusive TV. |
|
|
| 1 |
CD2 | for Multisystem TV. |
|
| Multi detects the formula of the |
|
| disc (NTSC/PAL) automatically |
|
| and displays the image on the screen correctly. | |
CD1 | for PAL exclusive TV. |
|
Selection of video output mode
•Select the video output mode before you play the disc.
•When you play an NTSC disc in MULTI mode on a PAL exclusive TV, the image may be distorted. If this happens, change the mode to PAL.
•When you play an NTSC disc in MULTI mode on a Multisystem TV, the image may blink for a moment. This symptom is caused by the Unit detecting the formula of the disc, not by a malfunction of the unit.
•Selection of video output mode works only in standby mode.
When you place a CD onto the currently selected tray, whose disc number shown on the CD indicator, reading of the CD starts.After the reading is completed, the total number of tracks and total playing time will appear, then the playing time of the first track.
| \ | \ |
READING NOW | Total number of tracks and | Playing time of the |
| playing time | 1st track |
If you place a video CD, “VIDEO CD” will appear before the playing time of the first track. If the video CD has the Playback Control function, when you press STOP folllowed by PBC, “VCD PBC” will appear.
To put an 8 cm CD onto a tray, insert it so that it is aligned with the groove in the tray's center.
If a tray is open when the System switches to the standby mode, the tray will close automatically.
Loading CDs
1 Press 0 on the CD Player corresponding to the tray you want to insert the disc into.
“CD OPEN” appears on the display and the disc tray slides out.
Compu Play
When 0 is pressed while the power is on standby, the power is automatically turned on.
2 Place a CD, with its label side up, onto the tray.
ATTENTION: To avoid malfunctions when you play a CD , set the CD in the right place at the center of the tray.
CORRECT INCORRECT
Playing a Video CD
You can play video CDs either with or without the PBC function.
1 Turn on the TV and select the video input so that you can view the pictures from the CD player.
Refer to the manual supplied for your TV.
2 Prepare a CD.
Refer to “Loading CDs” on this page.
3 Start playback of the CD.
Press CD £/8 to start playback of the currently selected CD, or press CD
When you play a Super VCD, “SVCD” appears on the display.
Compu Play
When CD £/8 or CD
To stop during play, press 7 
.
To stop play and remove the disc, press 0 for the disc
being played.
– 16 –
