JVC CA-MXJ980V, CA-MXJ970V Playing Back Video CDs/SVCDs, Selecting Video Output PAL, MULTI, Ntsc

Playing Back Video CDs/SVCDs

English

Selecting Video Output (PAL, MULTI, NTSC)

Video output is presetted for PAL.

To playback images correctly on your TV, select the video output according to your TV system, select the proper video output using the buttons on the Unit before you play a disc.

1	At standby mode.
2	Press a disc number, button for	3
	more than 2 sec.	2
	CD3 ....... for NTSC exclusive TV.
	CD2 ....... for Multisystem TV.	1
	Multi detects the formula of the
	disc (NTSC/PAL) automatically

and displays the image on the screen correctly. CD1 ....... for PAL exclusive TV.

Selection of Video Output Mode

•Select the video output mode before you play the disc.

•When you play an NTSC disc in MULTI mode on a PAL exclusive TV, the image may be distorted. If this happens, change the mode to PAL.

•When you play an NTSC disc in MULTI mode on a Multisystem TV, the image may blink for a moment. This symptom is caused by the Unit detecting the formula of the disc, not by a malfunction of the unit.

•Selection of video output mode works only in standby mode.

Loading CDs

3 Press 0 to close the tray.

“CD CLOSE” appears on the display.

4 Repeat steps 1 to 3 to insert other discs onto the other trays.

To continue putting discs onto other trays, even if a tray is open, by pressing the 0button of another disc tray, the open tray will close automatically, and the new tray will slide out.

When you place a CD onto the currently selected tray, whose disc number shown on the CD indicator, reading of the CD starts.After the reading is completed, the total number of tracks and total playing time will appear, then the playing time of the first track.

	\	\
READING NOW	Total number of tracks	Playing time of the
	and playing time	1st track

If you place a video CD, “VIDEO CD” will appear before the playing time of the first track. If the video CD has the Playback Control function, “VCD PBC” will appear when you press STOP followed by PBC.

To put an 8 cm CD onto a tray, insert it so that it is aligned with the groove in the tray's center.

If a tray is open when the System switches to the standby mode, the tray will close automatically.

Playing a Video CD

You can play video CDs either with or without the PBC function.

1 Press 0 on the CD Player corresponding to	1 Turn on the TV and select the video input so
the tray you want to insert the disc into.
“CD OPEN” appears on the display and the disc tray slides	that you can view the pictures from the CD
out.	player.
	Refer to the manual supplied for your TV.

Compu Play

When 0 is pressed while the power is on standby, the power is automatically turned on.

2 Place a CD, with its label side up, onto the tray.

ATTENTION: To avoid malfunctions when you play a CD, set the CD in the right place at the center of the tray.

2 Prepare a CD.

Refer to “Loading CDs” on this page.

3 Start playback of the CD.

Press CD £¥8, to start playback of the currently selected CD, or press CD 1-3, to select the disc and start play. When you play a Video CD, “VIDEO CD” appears on the display.

When you play a Super VCD, “SVCD” appears on the display.

CORRECT INCORRECT

Compu Play

When CD £¥8, or CD 1-3, is pressed while the system is on standby, the power is automatically turned on.

To stop during play, press 7.

To stop play and remove the disc, press 0 for the disc being

played.

– 16 –