JVC CA-MXJ980V, CA-MXJ970V manual Using Sleep Timer, Timer Priority

4 Set the turn-on time.

1) Press 4 or ¢ to set the hour, then press SET.

2)Press 4 or ¢ to set the minute, then press SET.

“OFF TIME” appears for 2 seconds, then the unit enters turn-off time setting mode.

5 Set the turn-off time.

1) Press 4 or ¢ to set the hour, then press SET.

2)Press 4 or ¢ to set the minute, then press SET.

The unit enters preset station selecting mode.

6 Select the preset station.

1)	Press 4 or ¢ to select the band
	(“TUNER FM” or “TUNER AM”),
	then press SET.
2)	Press 4 or ¢ to select a preset
	channel number, then press SET.
	The REC (Recording Timer) indicator
	stops flashing and remains lit. The
	settings you have entered are shown on the display in
	sequence.
7 Press		to turn off the unit (on

standby) if necessary.

If you want to listen to another source

while recording

Press REC START/STOP to stop recording. Without stopping it, you cannot change the source.

To turn on or off Recording Timer after it is set

1 Press CLOCK/TIMER repeatedly until “REC” appears on the display.

2To turn off the Recording Timer, press

CANCEL.

The REC (Recording Timer) indicator goes off from the display.

The Recording Timer is canceled, but the setting for the Recording Timer remains in memory.

To turn on the Recording Timer, press SET. The REC (Recording Timer) indicator lights up on the display. The settings you have entered are shown on the display in sequence for your confirmation.

English

Using Sleep Timer

With Sleep Timer, you can fall asleep to music.

You can set Sleep Timer when the unit is turned on.

How Sleep Timer works

The unit automatically turns off after the specified time length elapses.

On the remote control ONLY:

1 Press SLEEP.

The time length until shut-off appears and the

SLEEP indicator starts flashing on the display.

•Each time you press the button, the time length changes as follows:

102030 60 90 120

Canceled

2 Wait for about 5 seconds after specifying the time length.

The SLEEP indicator stops flashing and remains lit.

To check the remaining time until shut-off, press SLEEP once so that the remaining time until shut-off appears for about 5 seconds.

To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display.

To cancel the setting, press SLEEP repeatedly so that the SLEEP indicator goes off.

• Sleep Timer is also canceled when you turn off the unit.

Timer Priority

Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps.

Here are examples.

•Recording Timer has priority over Daily Timer and Sleep Timer.

If Daily Timer is set to come on while Recording Timer is operating, Daily Timer will not come on at all.

6:00 6:30 7:00 7:30

Recording Timer

Daily Timer

does not work.

If Recording Timer is set to come on while Sleep Timer is operating, Sleep Timer will not work (the SLEEP indicator does not go off).

6:00 6:30 7:00 7:30

Recording Timer

Sleep Timer

does not work.

– 28 –