4Press NSET MENU on the remote control again to exit from “SET MENU”.
■Audio information
FORMAT | Signal format. When this unit cannot detect a |
| digital signal, it automatically switches to |
| analog input. |
|
|
SAMPLING | The number of samples per second taken from |
| a continuous signal to make a discrete signal. |
|
|
CHANNEL | The number of source channels in the input |
| signal (front/surround/LFE). For example, a |
| |
| channels, 2 surround channels and LFE, is |
| displayed as “3/2/0.1”. |
|
|
BITRATE | The number of bits passing a given point per |
| second. |
|
|
FLAG | Flag data encoded in DTS, Dolby Digital, or |
| PCM signals that cue this unit to automatically |
| switch decoders. |
|
|
Note
■Video information
HDMI RES. | Resolution of the HDMI signals input or |
| output at the HDMI IN/OUT jacks of this |
| unit. |
|
|
HDMI ERROR | Error message for HDMI sources or |
| connected HDMI devices. See page 98 |
| for details. |
|
|
Playback
Using the sleep timer
Use this feature to automatically set this unit to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to the AC OUTLET(S) (see page 24).
Press 9SLEEP (or set the operation mode selector to KAMP and then press MSLEEP)
repeatedly to set the amount of time.
Each time you press 9SLEEP (or MSLEEP), the front panel display changes as shown below.
SLEEP 120min | SLEEP 90min |
SLEEP OFF SLEEP 30min | SLEEP 60min |
The SLEEP indicator flashes while you are switching the amount of time for the sleep timer. Once the sleep timer is set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program.
Flashes
SLEEP
Lights up
SLEEP
OPERATION | BASIC |
|
|
■Canceling the sleep timer
Press 9SLEEP (or MSLEEP) repeatedly until “SLEEP OFF” appears in the front panel display.
Disappears
The SLEEP indicator turns off, and “SLEEP OFF” disappears from the front panel display after a few seconds.
y
The sleep timer setting can also be canceled by pressing
GSTANDBY (or ASTANDBY/ON) to set this unit to the standby mode.
English