Yamaha HTR-6060 66 En, Selecting decoders used with sound, field programs Decoder Type

Advanced sound configurations

Sound field parameter Features

2ch Stereo

DIRECT

2-channel stereo direct. Bypasses the decoders and the DSP processors of this unit for pure hi-fi stereo sound when playing 2-channel analog sources.

Choices: AUTO, OFF

y

•Select “AUTO” to bypass the decoders, the DSP processors and the tone control circuitry only when “BASS” and “TREBLE” are set to 0 dB (see page 48).

•Select “OFF” not to bypass the decoders, the DSP processors and the tone control circuitry when “BASS” and “TREBLE” are set to 0 dB.

•When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2 channels and output from the front left and right speakers.

•The low-frequency signals input from the front left and right speakers are redirected to the subwoofer in the following cases:

–“LFE/BASS OUT” is set to “BOTH” (see page 72).

–“FRONT SP” is set to “SMALL” (see page 73) and “LFE/BASS OUT” is set to “SWFR” (see page 72).

7ch Stereo

CT LEVEL SL LEVEL SR LEVEL SB LEVEL PL LEVEL PR LEVEL

7-channel stereo center, surround left, surround right, surround back, presence left and presence right levels. Adjusts the volume level of each channel in the 7-channel stereo mode. The available parameters differ depending on the setting of the speakers.

Control range: 0 to 100%

2ch Enhancer	2-channel and 7-channel Compressed Music Enhancer effect level. The high-frequency signals
7ch Enhancer	of some sources may be emphasized too much. In this case, set the effect level to “LOW”.
	Choices: HIGH, LOW
	• Select “HIGH” for a high effect level.
	• Select “LOW” for a low effect level.

■Selecting decoders used with sound

field programs (Decoder Type)

Use this feature to select the desired decoder used with MOVIE sound field programs (except “Mono Movie”). See page 45 for details about MOVIE sound field program.

Available decoders

Decoder	Functions
PRO LOGIC	Dolby Pro Logic processing for any
	sources
	Dolby Pro Logic IIx (or Dolby Pro
PLIIx Movie	Logic II) processing for movie
	sources. The Pro Logic IIx decoder
PLII Movie
	is not available when “SB L/R SP”
	is set to “NONE” (see page 73).
Neo:6 Cinema	DTS processing for movie sources

Selecting decoders

■Selecting decoders for 2-channel

sources (surround decode mode)

Use this feature to play back sources with selected decoders. You can play back 2-channel sources on multi- channels.

Set the operation mode selector to KAMP and then press QSUR. DECODE repeatedly on the

remote control to select the desired surround decoder.

You can select from the following modes depending on the type of source you are playing and your personal preference.

y

You can change the decoder parameter settings. Press DISPLAY and then Dk/ nrepeatedly on the remote control to select the desired decoder parameter. You can change the value of the selected parameter by pressing

Dl/ hrepeatedly on the remote control.

66 En