Yamaha HTR-6060 owner manual Information on HDMI, 16 En, HDMI compatibility with this unit, Notes

Connections

Information on HDMI™

■HDMI compatibility with this unit

Audio signal	Audio signal	Compatible
		HDMI
types	formats
		components
2ch Linear PCM	2ch, 32-192 kHz,	CD, DVD-Video,
	16/20/24 bit	DVD-Audio, etc.
Multi-ch Linear	8ch, 32-192 kHz,	DVD-Audio, etc.
PCM	16/20/24 bit
DSD	2/5.1ch, 2.8224	SACD, etc.
	MHz, 1 bit
Bitstream	Dolby Digital, DTS	DVD-Video, etc.

■HDMI jack and cable plug

HDMI

HDMI cable plug

y

•We recommend using an HDMI cable shorter than 5 meters (16 feet) with the HDMI logo printed on it.

•Use a conversion cable (HDMI jack ↔ DVI-D jack) to connect this unit to other DVI components.

This unit’s HDMI interface is based on the following standards:

•HDMI Version 1.2a (High-Definition Multimedia Interface Specification Version 1.2a) licensed by HDMI Licensing, LLC.

•HDCP Revision 1.1 (High-bandwidth Digital Content Protection System Revision 1.1) licensed by Digital Content Protection, LLC.

Notes

•When CPPM copy-protected DVD audio is played back, video and audio signals may not be output depending on the type of the DVD player.

•This unit is not compatible with HDCP-incompatible HDMI or DVI components.

•You can check the potential problem about the HDMI connection (see page 41).

Notes

•Do not disconnect or connect the cable or turn off the power of the HDMI components connected to the HDMI OUT jack of this unit while data is being transferred. Doing so may disrupt playback or cause noise.

•Audio signals input at input jacks other than the HDMI IN 1 or HDMI IN 2 jack of this unit cannot be digitally output at the HDMI OUT jack.

•If you turn off the power of the video monitor connected to the HDMI OUT jack via a DVI connection, this unit may fail to establish the connection to the component.

16 En