English
Playing Back Audio CDs
Loading CDs | Playing Back Several Discs — Continuous Play | |
|
|
|
| You can play CDs continuously. | |
On the unit ONLY:
1 Press 0 for the disc tray (CD1 to 3) you want to load a CD onto.
The unit automatically turns on and the disc tray slides out. The Powered Rolling Panel also opens automatically.
2 Place a disc correctly in the circle of the disc tray, with its label side up.
CORRECT INCORRECT
•When using a CD single (8 cm), place it in the inner circle of the disc tray.
3 Press the same 0 you have pressed in step 1.
The disc tray closes, and the corresponding disc indicator (CD1 to CD3) lights up on the display.
4 Repeat steps 1 to 3 to place other CDs.
When loading one CD after another
When you press 0 for the next tray you want to place another CD onto, the first disc tray automatically closes and the next tray slides out.
About the disc indicators
Each disc indicator corresponds to the disc tray of the same number.
Disc number | 1 | 2 | 3 | |
|
|
|
| |
Disc indicator 
Disc marker
•The disc marker lights up for the disc number you have selected.
•The disc indicator flashes while the corresponding CD is being played.
•The disc indicator goes off when the unit has detected that there is no CD on the corresponding disc tray.
1 | Load CDs. |
|
2 | Press one of the disc number | 3 |
| ||
| buttons (CD1, CD2, and CD3) for | 2 |
| the disc you want to start play |
|
from. | 1 |
|
CD play starts from the first track of the selected disc.
Tracks of the currently playing disc
1 | 2 | 3 |
Track number | Elapsed playing time | |
•Pressing CD £¥8 instead of the disc number buttons starts play back if a CD is on one of the trays.
To stop during play, press 7
.To remove a disc, press 0 for the corresponding disc tray.
CD playback sequence
When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.
•When CD1 is pressed : CD1 ] CD2 ] CD3 (then stops)
•When CD2 is pressed : CD2 ] CD3 ] CD1 (then stops)
•When CD3 is pressed : CD3 ] CD1 ] CD2 (then stops)
*When only 2 CDs are loaded, they are played in the same order, but the disc tray without a CD is skipped.
Basic CD Operations
While playing a CD, you can perform the following operations.
To exchange CDs during playback of another discPress 0 corresponding to a CD, not playing or selected currently, to eject and exchange the CD.
If you exchange CDs during play, the current play will not stop until all CDs you have exchanged are played.
To stop play for a momentPress CD £¥8.
While pausing, the elapsed playing time flashes on the display.
To resume play, press CD £¥8 again.