JVC CA-MXJD8 manual English, To connect the speakers, To assemble and connect the AM loop antenna

English

To assemble and connect the AM loop antenna

To assemble the AM loop antenna

To connect the AM loop antenna and speaker cords

1 Hold 3 Release

2Insert

•If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl.

•Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception.

To connect the speakers

To connect the speaker cords

1 Open	2 Insert	3 Close
		FRONT
		MAIN SPEAKERS
		FRONT
		SUBWOOFERS
From right		From left
front main		front main
speaker		speaker
From		From
front subwoofer		front subwoofer

•When connecting the speaker cords, match the polarity of the speaker terminals: (+) to (+) and (–) to (–).

Speaker	Terminal color
	(+)	(–)
Front main speakers	Blue	Black
Front subwoofers	Red	Black

•Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

•DO NOT connect more than one speaker to each terminal.

• DO NOT push or pull the speakers as this will damage the foot spacers at the bottom of the speakers.

6