JVC CA-MXJD8 Changing the Picture Tone Remote INFO, To select a preset picture tone, Normal, Tint

Changing the Picture Tone Remote INFO

ONLY

While showing a playback picture on the TV, you can select the preset picture tone, or adjust it and store your own likeliness.

To select a preset picture tone

1Activate VFP.

		NORMAL
		GAMMA	0
		BRIGHTNESS	0
		CONTRAST	0
NORMAL		SATURATION	0
GAMMA	0
BRIGHTNESS	0	TINT	0
CONTRAST	0
SATURATION	0	SHARPNESS	0
TINT	0
SHARPNESS	0

On the TV screen

2Select a preset picture tone.

	NORMAL	CINEMA
	USER2	USER1
NORMAL	Normally select this.
CINEMA	Suitable for a movie source.

USER1/USER2 You can adjust parameters and can store the settings (see below).

GAMMA	Adjust if the neutral color is bright
	or dark. The brightness of dark and
	bright portions is maintained
	(–3 to +3).
BRIGHTNESS	Adjust if the picture is bright or
	dark as a whole (–8 to +8).
CONTRAST	Adjust if the far and near position
	is unnatural (–7 to +7).
SATURATION	Adjust if the picture is whitish or
	blackish (–7 to +7).
TINT	Adjust if the human skin color is
	unnatural (–7 to +7).
SHARPNESS	Adjust if the picture is indistinct
	(–8 to +8).

3Adjust the parameter.

4Repeat steps 2 to 3 to adjust other parameters.

5Finish setting.

Changing the Display Brightness	Remote
	ONLY

You can dim the display window.

DIMMER

To adjust the picture tone NORMAL

1 Select “USER1” or “USER2.”

• Follow steps 1 and 2 explained above.

2Select a parameter you want to adjust.

22