JVC CA-MXJD8 Optical Digital Output, To connect digital audio, To connect the AV COMPU LINK cords

To connect a center speaker and surround speakers

From center	CENTER
speaker

From left surround speaker

From right surround speaker

•Connect the center speaker to the CENTER jack.

•Connect the left surround speaker to the LEFT jack.

•Connect the right surround speaker to the RIGHT jack.

•Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

To connect digital audio

OPTICAL

DIGITAL

OUTPUT

Before connecting optical digital cord, remove the protective cap from the OPTICAL DIGITAL OUTPUT terminal.

To connect the AV COMPU LINK cords

The AV COMPU LINK control system allows you to use JVC’s TV with simple operations; by starting playing back a disc, the TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.

To use AV COMPU LINK, you need to connect the unit and the TV by using a cord with monaural mini-plugs (not supplied) in addition to the connection with a video cord (see page 4).

To set the video output selector

You can select the video output to match it to the color system of your TV.

NTSC: For an NTSC TV or

Multi-color system

TV.

PAL: For a PAL TV or

Multi-color system

TV.

Adjusting the Voltage Selector

Use a screwdriver to rotate the voltage selector so that the voltage marker is pointing at the same voltage as where you are plugging in the unit. (See also the back cover page.)

Voltage marker

DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.

7