Continued
Turning On the Power |
|
| |||
|
|
|
|
| |
To turn on the unit, press STANDBY/ON |
| . | STANDBY/ON | ||
| |||||
The STANDBY lamp on the unit goes off. | |||||
|
| ||||
|
| ||||
|
|
•When you press the source
The STANDBY lamp on the unit lights red.
•The clock flashes on the display until you set the
•A little power is always consumed even while the unit is in standby mode.
To switch off the power supply completely, unplug the ACpower cord from the AC outlet.
Turning Off the Unit Automatically (Auto Standby)Using Auto Standby, the unit automatically turns itself off (on standby) about 3 minutes after playing back a disc or a tape.
•You can also turn off the unit automatically by using the Sleep Timer. (See page 29.)
To select the source, press CD 6, TAPE 2 3, FM/AM/ DAB, or AUX.
•When you select CD or TAPE as the source, playback starts automatically.
To operate the CD player, see pages 12 to 15. To operate the tape deck, see page 16.
To operate the tuner (FM, AM (MW) or DAB), see pages 17to 24.
To record on a tape, see pages 25 and 26.To use an external equipment, see page 24.Adjusting the VolumeYou can adjust the volume level only while the unit is turned on. The volume level can be adjusted between “Volume MIN,” “Volume 1” – “Volume 31,” and “Volume MAX.”
•The volume level has no effect on recording.
To increase the volume, press VOLUME + (orturn VOLUME control clockwise on the unit).
VOLUME
To decrease the volume, press VOLUME – (or turn VOLUME control counterclockwise on the unit).
•When you press and hold either button, you can change the volume level continuously.
On the remote control ONLY:
To activate Auto Standby, press A.STANDBY. | A. STANDBY |
| |
The A.STANDBY indicator appears on the display. |
|
•When the playback is stopped, the A.STANDBY indicator starts flashing on the display.
To deactivate Auto Standby, press A.STANDBY again. The A.STANDBY indicator goes off.
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.
When you turn off the unit with the volume level is over “Volume 20.”
The volume level is automatically set to “Volume 20” next time you turn on the unit.
DO NOT turn off (on standby) the unit with the volume set to an extremely high level; Otherwise,
the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source. REMEMBER you cannot adjust the volume level while the unit is in standby mode.
10