4 Press SEARCH/SCROLL UP DOWN | GROUP | UP |
SEARCH/ | UP | SEARCH/ |
SCROLL | PRESET | SCROLL |
or SEARCH/SCROLL DOWN | / |
|
to select a desired compression | SELECT |
|
PRESET |
| |
| DOWN |
|
level. | GROUP |
|
|
|
•Each time you press the button, the DRC level changes as follows:
DRC 0
DRC 1 DRC 1/2
DRC 0: The DRC level adjustment is
canceled.
DRC 1/2: Medium level of compression is applied.
DRC 1: Maximum level of compression is applied. (Initial setting)
5 Press SELECT. | DOWN | GROUP | UP |
| SEARCH/ | UP | SEARCH/ |
| SCROLL | PRESET | SCROLL |
|
| / |
|
|
| SELECT |
|
|
| DOWN |
|
|
| PRESET |
|
|
| GROUP |
|
You can change the information appears on the display.
On the remote control ONLY:
DISPLAY
Press DISPLAY.•Each time you press the button, the information changes as follows:
Digital bit rate (kbps) and signal mode (stereo or mono)
Sig.(Signal) Quality:Reception measurement sent from the station (100 is the best reception)
•When the value is below 100, adjust the position of the antenna for the better reception.
Refreshing the Station ListFor tuning in to the new available DAB stations, you need to refresh the station list.
There are two ways for searching stations:
•Local search: Performs the search for stations on band III in the United Kingdom.
• Full search: | Performs the wider search for stations than |
| local search. When you bring this unit |
| outside of the United Kingdom, use this |
| search. This search is used mainly for the |
| use of outside of the United Kingdom. |
For local search:
Press SCAN briefly. | SCAN |
For full search:
Press and hold SCAN for more than 2 seconds.
The search begins.
The number of found stations is counted as the search is being proceeded.
DLS | Sig.(Signal) Quality |
Program Type
Signal Information
Ensemble
Channel and Frequency Time and Date
DLS (Dynamic Label Segment):Text messages sent from the station (Initial Setting)
Program Type: Types of broadcast programs
Ensemble: Type of ensemble
Time and Date: Time and day sent from the station
Channel and Frequency:Channel number and transmission frequency
Progress bar | Number of the found stations |
When the progress bar reaches to the right side of the display, the search finishes. After the search, the unit tunes in to the previously tuned station.
To clear the stored memory, press RDS/INFO for | RDS/INFO |
more than 2 seconds. Then, press SELECT after the |
|
message appears on the display. |
|
The DAB tuner starts the initial scanning. |
|
20