Listening to FM and AM (MW) Broadcasts
Tuning in to a Station
You can search for the station by either automatically or manually.
Auto Tuning
1 | FM/AM/DAB |
Press FM/AM/DAB repeatedly to |
select either “FM” or “AM (MW).”
The unit automatically turns on and tunes in to the previously received station.
•If the station previously selected is stored in a preset number, the preset number will also appear.
2 Press and hold ¢ or 4 (or DOWN | GROUP | UP | |
| SEARCH/ | UP | SEARCH/ |
| SCROLL | PRESET | SCROLL |
SCROLL UP ¢ or SCROLL | / |
| |
DOWN 4 on the unit) for | SELECT |
| |
PRESET |
| ||
|
| DOWN |
|
about 2 seconds until “Search..” | GROUP |
| |
|
| ||
appears on the display. |
|
|
|
“Searching..” appears and the unit starts searching |
| ||
for stations. |
|
|
|
• ¢ (SCROLL UP ¢): | Increases the frequencies. |
•4 (SCROLL DOWN 4): Decreases the frequencies.
The search stops when a station of sufficient signal strength is tuned in.
•If an FM program is broadcast in stereo, the ST (stereo) indicator lights up on the display (only when the reception is good).
To stop during searching, press ¢ or 4 (or SCROLL UP ¢ or SCROLL DOWN 4 on the unit).
Manual Tuning
1 Press FM/AM/DAB repeatedly to |
| FM/AM/DAB | |||
|
|
| |||
|
| select either “FM” or “AM (MW).” |
|
| |
2 | Press and hold ¢ or 4 (or | DOWN | GROUP | UP | |
|
| SEARCH/ | UP | SEARCH/ | |
|
|
| SCROLL | PRESET | SCROLL |
|
| UP ¢ or DOWN 4 on the |
| / |
|
|
| unit) for more than 3 seconds. |
| SELECT |
|
|
|
| PRESET |
| |
|
|
|
| DOWN |
|
|
|
|
| GROUP |
|
|
| • ¢ (SCROLL UP ¢): Increases the |
|
| |
|
| frequencies. |
|
|
•4 (SCROLL DOWN 4): Decreases the frequencies.
The frequency keeps changing quickly.
To stop during searching, release the button.
When you repeatedly press ¢ or 4 (or SCROLL UP ¢ or SCROLL DOWN 4 on the unit)
The frequency changes step by step.
To change the FM reception mode
On the remote control ONLY:
When an FM stereo broadcast is hard to receive | REPEAT |
/FM MODE | |
or noisy, press FM MODE so that the “Mono” |
|
appears on the display. Reception will improve. |
|
To restore the stereo effect, press FM MODE
again so that “Stereo” appears and the ST (stereo) indicator lights up on the display. In stereo mode, you can hear stereo sound when a stereo program is broadcast.
The stereo effect also restores when:
•changing the band (AM (MW), or DAB).
•changing the station frequency.
•changing the playing source.
•turning off (or on) the unit.
Presetting Stations
You can preset 20 FM and 10 AM (MW) stations manually.
In some cases, test frequencies have been already stored for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 2.
On the remote control ONLY:
1 | Tune in to the station you want to preset. | ||
|
| • See “Tuning in to a Station” on the left column. |
|
|
|
|
|
2 | Press PROGRAM. | PROGRAM | |
| |||
|
| An available preset number starts flashing on the |
|
|
| display. |
|
|
|
|
|
3 | Press PRESET GROUP or | SEARCH/ | UP | SEARCH/ | |
SCROLL | PRESET | SCROLL | |||
DOWN | GROUP | UP | |||
|
| ||||
| PRESET GROUP to select a |
| / |
| |
|
|
| SELECT |
| |
| preset number, then press |
| DOWN |
| |
|
| PRESET |
| ||
|
|
| GROUP |
| |
| PROGRAM. |
|
|
| |
| “Station Stored” appears and the preset station |
|
| ||
| is stored in memory. |
|
|
|
21