Recording
IMPORTANT:
•It should be noted that it may be unlawful to
•The recording level is automatically set correctly, so it is not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.
•If recordings you have made have excessive noise or static, the unit may be too close to a TV. Increase the distance between the TV and the unit.
•You can only use type I tape for recording.
•DO NOT turn off the unit while playing back or recording a tape. The cassette deck or tapes may be damaged.
•DO NOT use type II and type IV tapes since the unit is not compatible with such tapes.
•The use of
At the start and end of cassette tapes
There is leader tape which cannot be recorded onto. Thus, when recording from discs, FM/AM (MW)/DAB broadcasts, or external equipment, wind the leader tape first to ensure that the recording will be made without losing any music.
To protect your recordings
Cassettes have two small tabs on the back to protect against unexpected erasure or
To protect your recording, remove these tabs.
To
3 Start playing the
•When the source is FM, AM (MW), or DAB, tune in to the station you want to record.
•When recording from discs, see “Recording Discs— Disc Synchronized Recording” on page 26.
4 Press REC (recording). | REC |
• The REC indicator appears and 3 indicator lights up on the display.
5 Press TAPE ¤ ‹. | TAPE |
3 indicator starts flashing and the recording starts.
•If no cassette is inserted when you press REC “No TAPE” appears on the display.
•If a protected tape is inserted when you press REC “TAPE Protect” appears on the display.
To stop recording for a moment, press REC. |
| REC | ||
|
|
| ||
The recording is paused. To resume recording, press |
|
| ||
TAPE ¤ ‹. |
|
|
|
|
To stop recording, press 7. | 4 | 7 | ¢ |
|
| SCROLL DOWN | SELECT | SCROLL UP | |
The recording stops. |
|
|
|
|
To remove the cassette, press PUSH OPEN |
|
|
| |
|
|
| ||
while recording is stopped. |
| PUSH OPEN |
| |
|
|
|
|
|
|
|
|
|
|
Adhesive tape
Recording on a Tape
On the unit ONLY:
1 Put a recordable cassette in with the exposed part of the tape down.
•See also page 16.
2 Close the cassette holder gently.
To record on both sides—Reverse Mode
On the remote control ONLY:
Press REV. MODE (reverse mode) until | REV. MODE | |
|
| |
or | is lit on the display. |
|
•When using the Reverse Mode for recording, lights up and start recording in the forward ( 3 ) direction first.
To cancel the Reverse Mode, press REV.MODE repeatedly
until is lit on the display.
25