Manuals / Brands / TV and Video / VCR / JVC / TV and Video / VCR

JVC DD868EU specifications Playback

1 68

Download 68 pages, 1.44 Mb

EN 13

PLAYBACK

Basic

Playback

The easiest, most basic operation possible with your video

recorder is tape playback. Already-recorded signals on a video

tape are read by your video recorder and displayed on your TV

just like a TV programme.

Usable cassettes

LOAD A CASSETTE

1

Make sure the window side is up, the rear label side is

facing you and the arrow on the front of the cassette is

pointed toward the recorder. Don’t apply too much

pressure when inserting.

●The recorder power comes on automatically and the

counter is reset to 0:00:00.

●If the record safety tab has been removed, playback

begins automatically.

FIND PROGRAMME START

POINT

2

If the tape is advanced past the start point, press REW or

turn the TIME SCAN SHUTTLE ring to the left.

To go forward, press FF or turn the TIME SCAN

SHUTTLE ring to the right.

START PLAYBACK

3

Press PLAY. “BEST” appears blinking in the recorder's

display panel during automatic tracking. (Z pg. 24)

STOP PLAYBACK

4

Press STOP on the remote or STOP/EJECT on the

recorder’s front panel. Then press STOP/EJECT to

remove the cassette.

●Compact VHS camcorder recordings can be played on

this video recorder. Simply place the recorded cassette

into a VHS Cassette Adapter and it can be used just like

any full-sized VHS cassette.

●This video recorder can record on regular VHS and

Super VHS cassettes. However, it will record and play

back regular VHS signals only. It is not possible to play

back a recorded Super VHS tape.

Turn on the TV and select the VIDEO channel (or AV mode).

Tape Position Indicator

The tape position indicator

appears on screen when,

from the Stop mode, you

press FF, REW or perform an

Index Search. The position

of “5” in relation to “0”

(beginning) or “+” (end)

shows you where you are

on the tape.

”O.S.D.” (Z pg. 9) must

be set to “ON”, or the

indicator will not appear.

NOTE:

Depending on the type of tape used, there may be timeswhen the indication is not correct.

3

1:23:45

REMAIN 2:35

0

+++

Beginning End

TIME SCAN SHUTTLE

STOP/EJECT

PLAY

123

456

789

1

2

3

4

1

2

3

4

– –:– –

0



FF

PLAY

REW

STOP

Contents

Main HR-DD868EU EN CONTENTS SAFETY FIRST 2 INSTALLING YOUR NEW RECORDER 3 Safety Precautions CAUTION WARNING For Italy: Connections SITUATE RECORDER CONNECT RECORDER TO TV To Connect To A TV With NO AV Input Terminals . . . To Connect To A TV With AV Input Terminals . . . Auto Set Up Auto Channel Set/Auto Clock Set/Auto Guide Program Number Set TURN ON THE RECORDER SELECT COUNTRY pg. 56 57), then go to step 4. If you have selected any other country name (code), go to step 4. SELECT LANGUAGE If you are referring to the on-screen display PERFORM AUTO SET UP assigned Guide Program number for those stations according to the broadcast area. Auto clock may not function properly depending on the reception condition. Preset Download PERFORM PRESET DOWNLOAD SET VIDEO CHANNEL Auto clock may not function properly depending on the reception condition. When you perform T-V LINK function, be sure to use fully- wired 21-pin SCART cable. INFORMATION Language ACCESS COUNTRY SET SELECT COUNTRY SELECT LANGUAGE On-Screen Displays ENABLE/DISABLE ON-SCREEN DISPLAY The superimposed indication on the TV screen tells you what the recorder is doing. q6 Power Save Mode SELECT POWER SAVE The Just Clock function ( During Power Save, the display panel will be turned off. pg. 56) does not work while the Power Save mode is engaged. T-V Link Functions NexTView Link TV Auto Power On VCR Auto Standby Direct Rec Colour System Set INFORMATION ON COLOUR SYSTEM SELECT COLOUR SYSTEM About NTSC Playback The counter and tape remaining time readings will be incorrect. Playback Usable cassettes PLAYBACK LOAD A CASSETTE FIND PROGRAMME START POINT Playback Features Manual Tracking OVERRIDE AUTOMATIC TRACKING Skip Search Skip Search does not work properly during NTSC playback. It will be 9x normal playback speed with TimeScan ( ADJUST TRACKING MANUALLY ACCESS MODE SET SELECT PICTURE CONTROL SET MODE When you select EDIT, SOFT or SHARP, the selected mode will not change until you select again. When you select EDIT to dub tapes, be sure to select AUTO after you finish dubbing the tapes. When B.E.S.T. is OFF, "PICTURE CONTROL" switches automatically from AUTO to NORM. ACTIVATE REPEAT PLA YBACK STOP PLAYBACK Instant ReView ACTIVATE INSTANT REVIEW TimeScan "TIME SCAN AUDIO" must be set to "ON", or the sound will not be heard in TimeScan mode. ( Variable-Speed Search pg. 19) The audio will not synchronize with the video in TimeScan modes. TimeScan If you don't want to hear TimeScan audio, set "TIME SCAN AUDIO" to "OFF" (See below). TimeScan Audio 1 2 3 LOAD A CASSETTE Accidental erasure prevention CHOOSE A PROGRAMME PAUSE/RESUME RECORDING STOP RECORDING Features Record One Programme While Watching Another If your recorder is connected to the TV via AV connection, . . . SELECT CHANNEL TO WATCH Elapsed Recording Time Indication ENGAGE RECORD-PAUSE RESUME RECORDING Retake function does not work during Direct Rec ( Receiving Stereo And Bilingual Programmes To Record Stereo And Bilingual Programmes (A2) ACCESS HI-FI REC LEVEL CONTROL SCREEN ADJUST AUDIO RECORDING LEVEL B.E.S.T. Picture System RECORDING (cont.) Preparation SELECT B.E.S.T. MODE Recording Playback ACCESS SHOWVIEW SCREEN ENTER SHOWVIEW NUMBER ACCESS SHOWVIEW PROGRAM SCREEN S Timer Programming TIMER RECORDING SHOWVIEW SHOWVIEW 12345678 ACCESS SHOWVIEW DISPLAY Timer Warning Express Timer Programming ACCESS SHOWVIEW ACCESS PROGRAMME ENTER PROGRAMME START TIME ENTER PROGRAMME STOP TIME ENTER CHANNEL POSITION SET VPS/PDC MODE Z ENGAGE RECORDERS TIMER MODE Satellite Tuner Users Check, Cancel And Replace Programmes DISENGAGE TIMER MODE ACCESS PROGRAM CHECK SCREEN/DISPLAY ACCESS PROGRAM SCREEN/ DISPLAY To cancel or replace a programme... Auto SPLP Timer The Auto SP If you perform timer recording with both VPS/PDC and the Auto SP ACCESS MAIN MENU SCREEN ACCESS MODE SET SCREEN Automatic Satellite Programme SELECT AV2 SELECT MODE ENGAGE AUTO SATELLITE PROG REC MODE Remote A/B Code Switching REMOVE POWER SUPPLY Remote Control Functions SPECIAL FEATURES (cont.) SET TV BRAND CODE OPERATE TV TV Multi-brand Remote Control Control Your TV Using Additional Buttons Satellite Tuner Multi-Brand Remote Control SET SATELLITE TUNER BRAND CODE OPERATE SATELLITE TUNER EDITING Edit From A Camcorder SET RECORDERS INPUT START CAMCORDER START RECORDER All necessary cables can be obtained from your dealer. Synchro Editing SET RECORDER'S INPUT START SYNCHRO EDITING PAUSE SYNCHRO EDITING The Synchro Editing function may not work with the initial part of a camcorder tape. Edit To Or From Another Video Recorder When Using Your Video Recorder As The Source Player ... When Using Your Video Recorder As The Recording Deck ... SET RECORDING DECKS INPUT MODE AV2 SELECT Setting 1 2 3 4 5 Insert Editing SET INPUT MODE LOCATE END POINT RESET THE COUNTER ENGAGE INSERT EDITING START EDITING END INSERT EDITING FOR AV INSERT EDITING Audio Dubbing SET INPUT MODE ENGAGE AUDIO DUBBING START DUBBING END AUDIO DUBBING ACCESS JLIP ID NO. SET SET JLIP ID NUMBER SYSTEM CONNECTIONS If you don't have a decoder Connection To A Satellite Tuner If you have a decoder . . . SELECT INPUT MODE SYSTEM CONNECTIONS (cont.) CONNECT DECODER SET TUNER Connecting/ Using A Decoder Connecting/ Using A Stereo System When listening to sound through the connected stereo system, turn the TVs volume down completely. CAUTIONS: SUBSIDIARY SETTINGS Tuner Set ACCESS AUTO CH SET SELECT COUNTRY SELECT LANGUAGE Auto Channel Set PERFORM AUTO CHANNEL SET VIEW CONFIRMATION Storing Channels Manually SELECT BAND INPUT CHANNEL ENTER NEW CHANNEL INFORMATION ACCESS CONFIRMATION SELECT POSITION Change Station Channel Position SELECT ITEM SELECT NEW POSITION SELECT ITEM DELETE CHANNEL SELECT STATION NAME CHARACTER ENTER NEW CHARACTER * Set Stations (B) SELECT ITEM TV Station And ID List SELECT CHANNEL TO FINE-TUNE ACCESS MANUAL CHANNEL SET SCREEN PERFORM TUNING Fine-Tuning Channels Already Stored Video Channel Set ACCESS VIDEO CHANNEL SET MODE SET RF OUTPUT SYSTEM SET VIDEO CHANNEL With AV Connection Clock Set SET JUST CLOCK SET CLOCK DATA SOURCE CHANNEL POSITION START CLOCK OPERATION SHOWVIEW Setup When timer-programming with S When you wish to timer-record a satellite programme with S . Guide Program Number Set TROUBLESHOOTING POWER TAPE TRANSPORT RECORDING PLAYBACK TROUBLESHOOTING (cont.) TIMER RECORDING OTHER PROBLEMS QUESTIONS AND ANSWERS PLAYBACK RECORDING TIMER RECORDING INDEX FRONT VIEW # $*&^%9 !0 1 2 3 REAR VIEW DISPLAY PANEL 1 5 763 42 INDEX (cont.) REMOTE CONTROL W T q Remote Control LCD SPECIFICATIONS Page HR-DD868EU Auto Set Up pg. 56) as required. pg. 48) and/or clock setting ( EN International Telephone Country Code Press OK (remote). "Auto" appears on the display panel.