WARNING
To assure safety, special techniques are required for installation. The customer should never perform this work. Consult your dealer concerning installation.
Provide sufficient reinforcement when the ceiling on which this product will be installed is too weak. Install so as to prevent any safety related problems. If the ceiling is too weak or the installation is improperly performed, this product could possibly drop and cause injury or damage.
CAUTION
When replacing the lamp or filter, provide a solid footing from which a comfortable posture can be adopted. Working with an unstable footing or in an uncomfortable posture can result in injury or damage. When the installation work is difficult, lower to a safe height and call a professional installer.
Never suspend or hang objects from the ceiling mount. An excessive load can cause the ceiling mount to fall and result in injury or damage.
This product is to be used only for ceiling mounting. Do not use it for any other application. And never make alterations because this can cause an accident.
Do not mount any projector other than the
Do not install where there is danger of vibration or impact. This could cause the ceiling mount to drop and result in injury or damage.
CAUTION
Do not install in locations subject to low or high temperatures, near a kitchen table or humidifier, or where there is oil smoke or water vapor. This can result in projector malfunction, deterioration of image quality, fire or electrical shock.
Do not install the projector in a box or other closed space where the hot air from the projector cannot be exhausted. Do not block the exhaust port of the projector. Projector overheating can result in malfunction, loss of image quality or electrical shock. Permissible temperature range:
5 - 35 degrees C
Permissible humidity range:
20% - 80%, no condensation.
HANDLING PRECAUTIONS
Please observe the following cautions to prevent malfunction or deterioration of the product.
Do not install where there is danger of contact with excessive dust, oil smoke, tobacco smoke, water vapor. etc. These will adhere to the lens, liquid crystal panel, mirror, etc., and result in blurred or dark images.
Install in a room that can be darkened to prevent direct sunlight, illumination or reflected light on the screen. Such light will cause the images to appear whitish and be hard to view. Use curtains in rooms where light enters from the outside.
English
3
