JVC DLA-G150HTE

DLA-G150HTE

1-6 No.51847

Controls and Features

Bottom Surface

rAir inlet (filter)

Air is taken in through the filter to cool the light-source

lamp. If the filter is blocked or if something that obstructs

the flow of air is placed around the projector, heat may

build up inside and could cause a fire. For required

space, refer to “Precautions for Installation” on page 15.

CAUTIONS

•Be careful as paper, cloth or soft cushion could be drawn in

if placed nearby. Do not block the filter, or heat may build

up and could cause a fire.

•Clean the filter periodically. For details, refer to “Cleaning

and Replacing the Filter Cover” on page 61. Deposition of

dirt on the filter reduces the cooling effect, causing heat to

build up inside, which could cause a fire or malfunction.

tOpening for replacing the light-source lamp

For replacing the light-source lamp, refer to “Replacing

the Light-Source Lamp” on page 57.

yFixing foot

uPosition selecting screw for ceiling mounting

When using the projector in an upside-down, ceiling-

mounted position (inverted top-to-bottom and right-to-

left), the “position selecting screw for ceiling mounting”

must be turned to switch to ceiling mounting.

This will correct variance in color images (shading),

which otherwise would occur in ceiling mounting.

For more information, refer to “Setting the Position

Selecting Screw for Ceiling Mounting” on page 21.

CAUTION

•To ceiling-mount and adjust the projector, special expertise

and technique are necessary. Be sure to ask your dealer or

specialist to perform this work.