JVC DR-MH20S Free Rate Function, Second Audio Recording, Disc space DVD deck only, Recording time

				BASIC OPERATIONS ON DVD DECK EN 39
Free Rate Function				NOTES:
				● You can program this unit to timer-record, regardless of the disc
To record the entire program, the unit automatically sets the
				remaining time. When the disc remaining time is not enough, the unit
appropriate recording mode depending on the combination of the				performs “Relief Recording” ( pg. 48). To avoid this, make sure of
total time of the program to be recorded and either the remaining				the disc remaining time before setting timer-programing.
disc space or the specified recording time (from 60 minutes to 480				(Example) If you programed to timer-record for 60 minutes in SP
minutes).				mode on a 120-minute disc, the disc remaining time would be 30
8 To record the entire program within the actual remaining				minutes in XP mode, 60 minutes in SP mode, 120 minutes in LP
				mode, 180 minutes in EP mode, and 240 minutes in FR480 mode.
disc space (DVD deck only)
				Timer-recording will not complete beyond these remaining times.
Select “FR (JUST)” in a recording mode selection procedure.				● The maximum recording time of FR (JUST) mode is the same as the
● Note that this function is available only for timer programing recording				recording time of FR480 mode. When timer-programing a long
( pg. 46, 48) and dubbing from HDD to DVD ( pg. 58).				program in FR (JUST) mode on a disc whose remaining time is short,
8 To record the entire program by specifying the desired				it is recommended checking the disc remaining time in FR480 mode
				to see if the remaining time is enough for the program.
recording time
				● Even if more than one program are timer-programed in FR (JUST)
Select “FR60–FR360”, “FR420” or “FR480” in a recording mode
				mode, only the first one is recorded.
selection procedure. ( pg. 37, 40, 46, 48)
				● In order to ensure that the recording fits on the disc, this feature may
8 To record a 25-min. long daily program five times just on				leave a slight non-recorded section at the end of the disc.
the same DVD disc for example				● There may be some noise and sound disturbance at the point on the
				disc where the unit switches the mode.
Perform “VCR Plus+	®	Timer Programing” ( pg. 46) procedure. Be
sure to set the recording mode to “FR125” and set Weekly/Daily				Second Audio Recording
Rec Function to “MON–FRI” in step 8 to fit the total recording time
to the whole disc space.				This unit’s built-in MTS decoder enables reception of Multichannel
			A: 1st	TV Sound broadcast. To record a SAP program received, set “2ND
Blank			B: 2nd	AUDIO RECORD” to “ON”. ( pg. 68)
			C: 3rd	NOTE:
			D: 4th
			E: 5th	When the channel is changed on the unit;
				● The “MONO” indicator appears on the screen for about 5 seconds if
				the program is a monaural broadcast.
				● The “STEREO” indicator appears on the screen for about 5 seconds
When the same program is recorded in SP mode instead of in				if the program is a stereo broadcast.
				● Both “STEREO” and “SAP” indicators appear when a stereo program
“FR125”, the 5th program cannot be recorded.				is accompanied by SAP sound.
			A: 1st	● Both “MONO” and “SAP” indicators appear when the main audio on
				the monaural broadcast is accompanied by SAP sound.
Blank			B: 2nd
			C: 3rd
			D: 4th
			E: Blank (20 min.)