JVC DR-MH30S Remote Control Functions, Remote Control 1/2/3/4 Code Switching, Brand Name Code

64 EN REMOTE CONTROL

Remote Control Functions		CABLE/DBS
	TV AV/VIDEO	TV	DVD
Remote Control 1/2/3/4 Code Switching
	1
The remote control is capable of controlling four JVC video units	0 – 9	TV% +/–
independently. Each of the units can respond to one of four codes
(1, 2, 3 or 4). The remote control is preset to send 3 code signals		CH +/–
because your unit is initially set to respond to 3 code signals. You
can easily modify your unit to respond to 1, 2 or 4 code signals.	TV
Slide the TV/CABLE/DBS/DVD switch to DVD.		ENTER
4

1

CABLE/DBS

TVDVD

1 – 4

SET UP

TV Multi-Brand Remote Control

Your remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled.

ENTER

8

SET UP

●Keep pressing SET UP down during step 1.

1Press the number key “1” for 1, “2” for 2, “3” for 3 or “4” for 4 to change the remote control code, then press ENTER.

2Press 1 on the unit to turn off the unit.

3Press 4 on the unit for over 5 seconds while the unit is turned off. The code currently set appears on the front display panel.

4Press 8 on the remote control to change the unit’s code. The code currently set on the remote control blinks on the front display panel for approximately 5 seconds, and is applied to the unit.

NOTE:

When “POWER SAVE” is set to “ON” ( pg. 69), it is not possible to change the remote code.

●Turn off the TV using its remote control.

●Slide the TV/CABLE/DBS/DVD switch to TV.

IMPORTANT:

Although the provided remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability.

●Keep pressing SET UP down during step 1.

1 Enter your TV’s brand code using the number keys, then press

ENTER.

2 Press 1 on the unit’s remote control to turn on the TV and try operations ( step 3).

●Once you have set the remote control to operate the TV, you do not have to repeat this step until you replace your remote control’s batteries.

●Some brands of TVs have more than one code. If the TV does not function with one code, try entering another.

3 Press the corresponding buttons to operate the TV: 1, TV/ VIDEO, CH +/–,TV VOLUME +/–,TV MUTING, number keys.

●For some brands of TVs, you must press ENTER after having pressed the number keys.

BRAND NAME	CODE
JVC	01, 03
HITACHI	10
MAGNAVOX	02
MITSUBISHI	03
PANASONIC	04, 11
RCA	05
SHARP	06
SONY	07
SAMSUNG	12
SANYO	13
SEARS	13
TOSHIBA	08
ZENITH	09