JVC DR-MH30S, DR-MH20S manual Semiauto Clock Set Manual Clock Set, Auto Daylight Saving Time

DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP

22 EN INITIAL SETTINGS

Clock Set		NOTE:
		If an incorrect time is displayed by the Plug & Play function, you may be
Perform clock setting only if the clock has not been set correctly by		receiving the clock setting data of a PBS channel from an adjacent time
		zone or from an incorrect PBS channel from a cable TV system. If you
the Plug&Play setting.		selected “AUTO” for the host channel in step 5, be sure to select the
		correct time zone manually.
● Turn on the unit.		8 Press SET UP to complete the setting.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.		IMPORTANT:
CABLE/DBS		Turn off the unit after performing Semiauto Clock. “AUTO” will appear
		on the front display panel while the clock is being set. The current
TV	DVD
		clock time will appear automatically when the clock setting is
		complete.
		Auto Daylight Saving Time
		This function enables automatic adjustment of the unit’s clock at
		the start and end of Daylight Saving Time.
		With Auto DST activated, —
		— on the first Sunday of April at 2:00 AM, the clock is adjusted
ENTER		to 3:00 AM.
		— on the last Sunday of October at 2:00 AM, the clock is
rtwe		adjusted to 1:00 AM.
		NOTE:
		Timer recording may not function correctly at the time Daylight
		Saving Time is adjusted.

SET UP

Semiauto Clock Set

Manual Clock Set

1 Press SET UP to access the Main Menu screen.

2Press w e to select “INITIAL SET UP”, then press ENTER.

3Press w e to select “CLOCK

SET UP”, then press ENTER.	DVD VIDEO SET UP		HDD/DVD SET UP	FUNCTION SET UP INITIAL SET UP
	TUNER SET UP		STB SET UP	CLOCK SET UP
		AUTO CLOCK				ON
		HOST CH			AUTO
		D. S. T.			AUTO
		TIME ZONE			AUTO

You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually.

NOTE:

The time set previously will be erased when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.

1 Press SET UP to access the Main Menu screen.

2Press w e to select “INITIAL SET UP”, then press ENTER.

3Press w e to select “CLOCK

SET UP”, then press ENTER. TUNER SET UP STB SET UP CLOCK SET UP

4 Press rt to select “AUTO CLOCK”, then press ENTER. Press rt to select “OFF”, then press ENTER.

5Press rt to select “TIME”, then press ENTER. Press rt until the desired time appears, then press ENTER to start clock.

SET UP	ENTER	SELECT WITH [	] THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT

EXIT SELECT

DVD VIDEO SET UP		HDD/DVD SET UP	FUNCTION SET UP		INITIAL SET UP
TUNER SET UP		STB SET UP	CLOCK SET UP
	AUTO CLOCK			OFF
	TIME			- - : - -
	DATE			1/1(THU)
	YEAR			2004
	D. S. T.				ON

SET UP	ENTER	SELECT WITH [	] THEN PRESS [ENTER]
EXIT	SELECT	PRESS [SET UP] TO EXIT

4 Press rt to select “AUTO	AUTO CLOCK	ON
CLOCK”, then press ENTER.	HOST CH	AUTO
Press rt to select “ON”, then	D. S. T.	AUTO
	TIME ZONE	AUTO

press ENTER.

5 Press rt to select “HOST	SET UP	ENTER	SELECT WITH [ ] THEN PRESS [ENTER]
	EXIT	SELECT	PRESS [SET UP] TO EXIT
CH”, then press ENTER.
Press rt to select “AUTO” or the

desired PBS channel number, then press ENTER.

NOTE:

Some PBS channels do not transmit clock setting data.

6 Press rt to select “D.S.T.”, then press ENTER. Press rt to select the desired setting, then press ENTER.

AUTO: Select if you want to adjust your unit’s clock automatically by the incoming signal from the host channel. Be sure to select the correct time zone manually in step 7.

ON: Adjustment will be made by the built-in clock itself.

OFF: Select when Daylight Saving Time does not apply to you.

7 Press rt to select “TIME ZONE”, then press ENTER. Press rt to select “AUTO” or the desired time zone, then press ENTER.

●Each time you press rt, the time zone changes as follows:

{AUTO{ATLANTIC{EASTERN{CENTRAL{

MOUNTAIN{PACIFIC{ALASKA{HAWAII{ (back to the beginning)

●Set the date and year in the same way.

●Holding rt changes the time in 30-minute intervals, or changes the date in 15-day intervals.

6 Press rt to select “D.S.T.”, then press ENTER. Press rt to select the desired setting, then press ENTER.

ON: Adjustment will be made by the built-in clock itself.

OFF: Select when Daylight Saving Time does not apply to you.

7 Press SET UP to complete the setting.