SUBSIDIARY SETTINGS EN 73

cSystem Setup

IMPORTANT:

Normally, Auto Set Up (A pg. 17), Preset Download (A pg. 18)
Guide Programme Number Set

1Press SET UP to access the Main Menu screen.

2Press selection keys to select AINITIAL SET UPB, then press

G.

or Auto Channel Set (A pg. 74) sets the Guide Programme numbers automatically. You need to set the Guide Programme numbers manually only in the following cases.

●When timer programming with the asystem, the channel position, where the station you wish to record is received on your unit, is not selected,

OR

when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has taken place,

^Set the Guide Programme number for that station manually.●When you wish to timer record a satellite programme with the asystem,

^Set the Guide Programme numbers for all satellite broadcasts received on your satellite receiver.

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

CABLE/SAT

3Press selection keys to select ATUNER SETB, then press G.4Press selection keys to select AGUIDE PROG SETB, then press ENTER.5Press selection keys to select AGUIDE PROGB, then press

ENTER.

6Press selection keys to select the Guide Programme number for the desired station as shown in the TV listings. Then press

ENTER.

DVD VIDEO SET UP HDD/DVD SET UP

FUNCTION SET UP

INITIAL SET UP

TUNER SET

 

CLOCK SET

 

 

 

AUTO CH SET

MANUAL CH SET

 

 

SAT CONTROL SET

GUIDE PROG SET

 

SET UP

ENTER

SELECT WITH @ THEN PRESS [ENTER]

 

 

PRESS [SET UP] TO EXIT

 

EXIT

SELECT

 

 

 

111213 INITIAL SET UP > GUIDE PROG SET

 

 

GUIDE PROG

 

 

1

TV PROG

 

 

YLE2 1

 

 

 

RETURN

SET UP

ENTER

SELECT WITH @ THEN PRESS [ENTER]

 

 

PRESS [SET UP] TO EXIT

 

EXIT

SELECT

 

 

 

TV DVD

AUX

ENTER

Selection Keys

FGDE

7Press selection keys to select ATV PROGB, then press ENTER. Press selection keys to select the number of the unit’s channel position on which the Guide Programme number’s broadcast is received by the unit or the satellite receiver. Then press ENTER.

●Pressing AUX changes ATV PROGB to ASATB.

●To timer record a satellite programme with the a system, you need to install the provided Satellite Controller and perform the procedure described in ASatellite Receiver Control SettingB (A pg. 22).

●Repeat steps 5 – 7 as necessary.8Press SET UP to complete the setting.Guide Programme Number

AGuide Programme (GUIDE PROG) numberB refers to the assigned TV station numbers, according to broadcast area, for the atimer recording. The Guide Programme Numbers can be found in most TV listings.

SET UP