JVC DR-MH50S VIDEO:, F-1Input Setting, DECODER, SAT VIDEO:, SAT S-VIDEO:, DECODER:, 8F-1INPUT ^ VIDEO / S-VIDEO VIDEO:

EDITING EN 65

L-2 Select Setting F-1 Input Setting

Set AL-2 SELECTB to the appropriate mode depending on the type of appliance connected to the unit’s [L-2 IN/DECODER] connector.

1Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB (A pg. 64).

2Press selection keys to select AL-2 SELECTB, then press ENTER.

3Press selection keys

	to select the	DVD VIDEO SET UP			HDD/DVD SET UP		FUNCTION SET UP		INITIAL SET UP
	appropriate setting,	REC/PLAY SET UP				DISPLAY SET	VIDEO IN/OUT
	then press ENTER.		MONITOR TYPE					4:3LB
4
	Press SET UP to		F-1 INPUT					VIDEO
			L-1 OUTPUT
								VIDEO
	complete the setting.
			L-1 INPUT
								SCART VIDEOVIDEO
									S-VIDEO
			L-2 SELECT					VIDEO
									SAT VIDEO
									SAT S-VIDEO
		SET UP		ENTER		SELECT WITH @ THEN PRESS DECODER[ENTER]
				SELECT		PRESS [SET UP] TO EXIT
		EXIT

* The boldface settings below indicate the settings at your purchase.

8L-2 SELECT ^ VIDEO / S-VIDEO /SAT VIDEO / SAT S-VIDEO /

DECODER

Select AVIDEOB or AS-VIDEOBto use this unit as the recording deck with the player connected to the [L-2 IN/DECODER] connector, or to use the satellite receiver connected to the [L-2 IN/ DECODER] connector.

VIDEO:

If a connected appliance’s output is compatible only with regular video signals, set to AVIDEOB.

S-VIDEO:

If a connected appliance’s output is compatible with Y/C signals, set to AS-VIDEOB. You can obtain high-quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

Select ASAT VIDEOB or ASAT S-VIDEOBto view a satellite programme with the TV set while the unit is turned off. (A pg. 68)

SAT VIDEO:

If a connected satellite receiver’s output is compatible only with regular video signals, set to ASAT VIDEOB.

SAT S-VIDEO:

If a connected satellite receiver’s output is compatible with Y/C signals, set to ASAT S-VIDEOB. You can obtain a high-quality S-VHS picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

DECODER:

To use a decoder connected to the [L-2 IN/DECODER] connector.

NOTES:

●If you have a satellite receiver or a decoder connected to the [L-2 IN/DECODER] connector, be sure to set AL-2 SELECTB back to appropriate mode after editing.

●If you are not connecting a satellite receiver or a decoder to the [L-2 IN/DECODER] connector, leave AL-2 SELECTB set to

AVIDEOB.

●When AL-2 SELECTB is set to ASAT VIDEOB and ASAT S-VIDEOB, ASATB appears on the TV screen or front display panel instead of AL-2B.

●If AL-1 OUTPUTB is set to ASCART S-VIDEOB, it is not possible to set AL-2 SELECTB to ADECODERB or ASAT VIDEOB.

●If AL-1 OUTPUTB is set to ASCART RGBB, it is not possible to set AL-2 SELECTB to ADECODERB or ASAT S-VIDEOB.

●If AL-1 OUTPUTB is set to ACOMPONENTB and AL-2 SELECTB to ASAT VIDEOB, ASAT S-VIDEOBor ADECODERB, be sure to connect the [L-1 IN/OUT] connector with a TV.

●If AL-2 SELECTB is set to ASAT S-VIDEOB, be sure to set AL-1 OUTPUTB to ASCART S-VIDEOB.

Set AF-1 INPUTB to the appropriate mode depending on the connector (VIDEO or S-VIDEO) being used on the front panel.

1 Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB (A pg. 64).

2 Press selection keys to select AF-1 INPUTB, then press

ENTER.

3 Press selection keys

to select the	DVD VIDEO SET UP		HDD/DVD SET UP	FUNCTION SET UP INITIAL SET UP
	REC/PLAY SET UP		DISPLAY SET	VIDEO IN/OUT
appropriate setting,
then press ENTER.		MONITOR TYPE			4:3LB
4 Press SET UP to
		F-1 INPUT			VIDEO
		L-1 OUTPUT				S-VIDEO
complete the setting.						VIDEO
		L-1 INPUT			SCART VIDEO
		L-2 SELECT			VIDEO

SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT
EXIT	SELECT

* The boldface settings below indicate the settings at your purchase.

8F-1 INPUT ^ VIDEO / S-VIDEO VIDEO:

When connecting an appliance to the [VIDEO] input connector, set to AVIDEOB.

S-VIDEO:

When connecting an appliance to the [S-VIDEO] input connector, set to AS-VIDEOB.