TROUBLESHOOTING EN 83

On-screen Message
CAN NOT FINALISE THIS DISC
DISC NOT REGISTERED IN THE LIBRARYREGISTER DISC?

●A disc that is not registered in the library has been inserted. Register the disc as necessary. (A pg. 56)

INSERT DISC XXXX

●Appears when a title that has been selected in the library is not contained in the loaded disc.

CAN NOT RECORD OR MAKE PLAY LISTDELETE UNWANTED TITLES●Recording and/or editing cannot be performed.●The number of titles exceeds 99.●The number of play lists exceeds 99.SET CLOCK BEFORE TIMER PROGRAMMING●To set the timer programme, the clock must be set in advance. (A pg. 77)PROGRAMME FULLDELETE UNWANTED TIMER PROGRAMMES●You can programme this unit to timer record as many as

32 programmes. To programme more, you need to cancel a timer programme already set. (A pg. 48)

DISC NOT LOADED

●Finalising is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry. (A pg. 9, 79)

CAN NOT CANCEL FINALISATION OF THIS DISC

●Cancelling disc finalisation is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry. (A pg. 9, 79)

PRESS [STOP] AGAIN TO STOP RECORDING●During Live Memory playback, o has been pressed. (A pg. 42)TIMER RECORDING COMPLETED●Timer recording has finished during Live Memory playback.PLAYBACK WILL STOPTHEN TIMER RECORDING WILL START

●Timer recording finished during Live Memory playback, then the next timer recording is about to begin while playback continues.

COPY PROHIBITEDCAN NOT RECORD●An attempt has been made to record copy-protected contents.

●An attempt has been made to record copy-once contents on a disc that is not CPRM compatible, such as DVD-R.

COPY PROHIBITED

CAN NOT PLAY

●Operation has been attempted when a disc is not loaded, or loaded upside down. (A pg. 8)

DISC NOT RECORDABLEINSERT RECORDABLE DISC

●When a playback-only disc or a finalised disc is loaded, R has been pressed. (A pg. 5)

SHOWVIEW NO. ERRORCONFIRM SHOWVIEW NO. THEN RETRY●An invalid anumber has been input. (A pg. 45)GUIDE PROGRAM IS NOT SETSET GUIDE PROGRAM THEN RETRY

●To set the timer programme using the asystem, the Guide Programme Number must be set in advance. (A pg. 73)

CAN NOT SET SHOWVIEW TIMER PROGRAMMING DURING TIMER RECORDING OR INSTANT TIMER RECORDING

●Appears when you tried to input a anumber during timer recording or instant timer recording.

REGION CODE ERRORCHECK DISC

●The unit has detected invalid contents at the start or in the middle of playback.

THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT RECOGNIZEDMAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND POWERED ON

●An attempt has been made to start DV dubbing when a digital video camera is not properly connected to the unit.

●Check the connection. (A pg. 60)

●A disc loaded cannot be played back on this unit since the region number of the disc does not match that of the unit. (A pg. 6)

UNREADABLE DISC

CHECK DISC

●When an incompatible disc is loaded, I has been pressed. (A pg. 6)COULD NOT FORMAT THE DISCCHECK THE DISC

●Formatting is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry. (A pg. 9, 78)