40 EN OPERATIONS ON DVD DECK
Free Rate Function

 

 

NOTES:

 

 

 

 

 

● You can program this unit to timer-record, regardless of the disc

To record the entire program, the unit automatically set the

 

remaining time. When the disc remaining time is not enough,

appropriate recording mode depending on the combination of the

 

recording may stop in the middle of a program. To avoid this, make

total time of the program to be recorded and either the remaining

 

sure of the disc remaining time before setting timer-programing.

disc space or the specified recording time (from 60 minutes to 480

 

(Example) If you programed to timer-record for 60 minutes in SP

minutes).

 

 

mode on a 120-minute disc, the disc remaining time would be 30

8 To record the entire program within the actual remaining

 

minutes in XP mode, 60 minutes in SP mode, 120 minutes in LP

 

mode, 180 minutes in EP mode, and 240 minutes in FR480 mode.

disc space

 

 

 

 

Timer-recording will not complete beyond these remaining times.

Select “FR (JUST)” in a recording mode selection procedure.

 

● The maximum recording time of FR (JUST) mode is the same as the

( pg. 41, 42)

 

 

recording time of FR480 mode. When timer-programing a long

● Note that this function is available only for timer programing

 

program in FR (JUST) mode on a disc whose remaining time is short,

recording.

 

 

it is recommended checking the disc remaining time in FR480 mode

8 To record the entire program by specifying the desired

 

to see if the remaining time is enough for the program.

 

● Even if more than one program are timer-programed in FR (JUST)

recording time

 

 

 

 

mode, only the first one is recorded.

Select “FR60–FR360”, “FR420” or “FR480” in a recording mode

 

 

● In order to ensure that the recording fits on the disc, this feature may

selection procedure. ( pg. 38, 41, 42)

 

 

 

 

leave a slight non-recorded section at the end of the disc.

 

 

 

 

 

8 To record a 25-min. long daily program five times just on a

 

● There may be some noise and sound disturbance at the point on the

 

disc where the unit switches the mode.

same disc for example

 

 

 

 

 

Perform “VCR Plus+® Timer Programing” ( pg. 41) procedure. Be

 

Second Audio Recording

sure to set the recording mode to “FR125” and set Weekly/Daily

 

Rec Function to “MON–FRI” in step 6 to fit the total recording time

 

This unit’s built-in MTS decoder enables reception of Multichannel

to the whole disc space.

 

 

TV Sound broadcast. To record a SAP program received, set “2ND

 

 

 

A: 1st

 

AUDIO RECORD” to “ON”. ( pg. 74)

 

 

 

 

Blank

 

B: 2nd

 

NOTE:

 

C: 3rd

 

 

 

 

 

When the channel is changed on the unit;

 

 

 

D: 4th

 

 

 

 

 

● The “MONO” indicator appears on the screen for about 5 seconds if

 

 

 

E: 5th

 

 

 

 

 

 

 

 

 

 

the program is a monaural broadcast.

 

 

 

 

 

● The “STEREO” indicator appears on the screen for about 5 seconds

 

 

 

 

 

if the program is a stereo broadcast.

When the same program is recorded in SP mode instead of in

 

● Both “STEREO” and “SAP” indicators appear when a stereo program

 

is accompanied by SAP sound.

“FR125”, the 5th program cannot be recorded.

 

 

● Both “MONO” and “SAP” indicators appear when the main audio on

 

 

 

A: 1st

 

the monaural broadcast is accompanied by SAP sound.

Blank

 

 

B: 2nd

 

 

 

C: 3rd

 

 

 

 

 

 

 

 

 

 

D: 4th

 

 

 

 

 

E: Blank (20 min.)