OPERATIONS ON DVD DECK EN 45

 

 

 

 

 

Program’s information on the front display panel

DVD TIMER (#)

 

 

 

 

You can check the details of the programs even when the power

 

 

 

 

is turned off. (It is necessary that the Power Save mode

VCR/DVD

 

 

 

 

1

2

3

1

( pg. 74) is disengaged or the unit is not in timer standby

 

 

4

5

6

 

mode.) However, it is not possible to cancel or change the

CANCEL

7

8

9

 

 

program’s setting.

 

0

 

 

PROG/CHECK

 

 

 

 

A Press PROG/CHECK.

 

 

 

 

 

● “NEW PROG” or “P-1” (if 8 programs have already been set)

ENTER

 

 

 

rtw e

appears.

 

 

 

 

B Press rt until the desired program number (“P-1” to “P-8”)

 

 

 

 

 

 

 

 

 

 

appears, then press ENTER.

 

 

 

 

 

C Press e.

 

 

 

 

 

● Each time you press e, the indication changes as follows (the

 

 

 

 

 

settings in parentheses are examples):

 

 

 

 

 

Date (“DATE 03.08SU”) ] Start time (“ON 11:00”) ] Stop time

 

 

 

 

 

(“OFF 11:30”) ] Channel (“CH 1”) ] Weekly/Daily (“MO-FR

 

 

 

 

 

DAILY”) ] Program number (“P-1”) and recording mode (SP) ]

 

 

 

 

 

(Back to the beginning)

DPress PROG/CHECK to complete checking.

● The normal display resumes.

Check, Cancel And Change Programs1 When the DVD timer lamp lights on the unit Press DVD TIMER (#), then press 1.

When “” lights on the front display panel and the DVD timer lamp also lights up on the unit.

Press 1.

When “R-LK” lights on the front display panel

Press REC LINK on the unit, then press 1.

When the DVD lamp does not light up on the unit

Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.

2 Press PROG/CHECK to access the Program Check screen.

● To return to the previous screen after you check the program, press PROG/CHECK again.

To cancel the program

Press rt to select a program to be cancelled, then press

CANCEL.

3 Press rt to select the program, then press ENTER. The program screen appears.

4 Change the settings of the desired recording options as required.

●Refer to steps 5 – 10 in “Manual Timer Programing” ( pg. 42).

5 Press PROG/CHECK to complete timer correction. The previous screen resumes.

6 For VCR Plus+, Manual or On-Disc Timer Programing Press DVD TIMER (#).

For Automatic Satellite Program Recording Press REC LINK on the unit for 2 seconds or more.

●The DVD timer lamp also lights up on the unit and the VCR deck is automatically selected. When the VCR deck is in timer standby mode, the unit is automatically turned off.

When Programs Overlap Each Other

If “PROGRAM OVERLAPPED” appears, you have another program overlapping the program you have just made. Confirm with the arrow on “OK”, then press PROG/CHECK. Program Check screen appears and conflicting programs will be highlighted in pink.

Example: Program 3 (you have just made) and Program 4 overlap each other.

1 Confirm the overlapping programs. Overlapping programs appear on the TV screen.

NOTE:

If you do not mind this overlap, press PROG/CHECK to finish the timer

program setting. The program with the lower program number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the unit will return to the normal screen.

2 Press rt to select the desired program to be cancelled or changed.

To cancel the program

Press CANCEL.

●“THE TIMER PROGRAMING SETTING WAS CANCELLED” appears on the TV screen for about 5 seconds, then the normal screen resumes.

To change the program setting

Press ENTER, then go to step 3.

3 Change the program setting.

●Refer to steps 5 – 10 in “Manual Timer Programing” ( pg. 42).

4 Press PROG/CHECK to check if the conflict has been settled. Program check screen appears.

5 Engage the unit’s timer mode.

●Refer to step 6 in “Check, Cancel And Change Programs” ( pg. 45).

NOTE:

When any overlaps remain after deletion and modification of programs, Program Check screen remains showing the conflicting programs. In such a case, repeat the procedure above until the conflict is solved.