74 EN SUBSIDIARY SETTINGS
VIDEO IN/OUT8 GRAY BACK — OFF / ON
8MONITOR TYPE — 4:3LB / 4:3PS / 16:9 AUTO / 16:9 FIX
You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for
When this function is set to “ON”, the TV screen becomes all grey when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set this function to “OFF”.
8FRONT AUX F-1 — VIDEO / S-VIDEO
Select the appropriate mode depending on the connector
VIDEO: To use the VIDEO input connector on the front panel.
8DIMMER — BRIGHT / DIM
You can change the brightness of the front display panel. BRIGHT: Normally select this.
DIM: To dim the front display panel. (Blue lamp on the front display panel is turned off.)
8REAR AUX L-1 — VIDEO / S-VIDEO
Select the appropriate mode depending on the connector
VIDEO: To use the VIDEO INPUT connector on the rear panel.
8SAVE AS LIBRARY — OFF / ON
When this function is set to “ON”, the recording information is automatically stored in the library. For details, refer to “Modify Library Information” ( pg. 60).
8XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a program in XP mode. When this function is set to “LINEAR PCM”, you can obtain a
DOLBY DIGITAL: To record in Dolby Digital format.
LINEAR PCM: To record in Linear PCM format.
8POWER SAVE — OFF / ON
When this function is set to “ON”, you can reduce the power consumption while the unit is turned off.
NOTES:
●During Power Save mode —
—the front display panel will be turned off.
●Power Save does not work when —
—the unit is in the Timer mode.
—the unit’s power is turned off after
—the Automatic Satellite Program Recording mode is engaged.
●It takes some time for the unit to complete initialisation after you turn on unit power, with “WAKE UP” blinking on the front display panel.
8ON SCREEN LANGUAGE
This unit offers you the choice to view
For details, refer to
82ND AUDIO RECORD — OFF /ON
When this function is set to “ON”;
If a SAP program is received, the SAP audio is recorded on L/R tracks. The main audio is not recorded.
If a
When this function is set to “OFF”, the SAP audio cannot be recorded.
NOTE:
When the channel is changed on the unit;
●The “MONO” indicator appears on the screen for about 5 seconds if the program is a monaural broadcast.
●The “STEREO” indicator appears on the screen for about 5 seconds if the program is a stereo broadcast.
●Both “STEREO” and “SAP” indicators appear when a stereo program is accompanied by SAP sound.
●Both “MONO” and “SAP” indicators appear when the main audio on the monaural broadcast is accompanied by SAP sound.
8RESUME — ON / OFF / DISC RESUME
When this function is set to “ON” or “DISC RESUME”, you can use the resume function. ( pg. 27)
ON: You can start playback from the resume point of the placed disc.
OFF: You cannot use the resume function.
DISC RESUME: The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected.
NOTE:
“DISC RESUME” setting works on DVD VIDEO, VCD and already finalised
8SUPERIMPOSE — OFF / AUTO
When this function is set to “AUTO”, various operational indicators appear on the TV screen. Messages appear in the selected language. ( pg. 19)
OFF: To turn off superimposed indications.
AUTO: To superimpose operational indications for approximately five seconds just after the corresponding operation.
NOTES:
●Even when “SUPERIMPOSE” is set to “OFF”, you can display the various operational indicators by pressing ON SCREEN. To clear the operational indicators, press ON SCREEN again.
●When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to “OFF” before starting. ( pg. 74)
●When you select “AUTO”, during playback, the operation mode indicators may be disturbed depending on the type of disc being used.