OPERATIONS ON DVD DECK EN 39
Recording Features
●Turn on the unit.
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/CABLE/DBS/DVD switch to DVD.
●Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.
This easy method lets you record for from 30 minutes to 6 hours (selectable in
1 Press 7 on the unit to start recording.
2 Press 7 again to engage the ITR mode.
●On the front display panel, “0:30” appears.
3 If you want to record for more than 30 minutes, press 7 to extend the time. Each press extends recording time by 30 minutes.
NOTES:
●You can only perform ITR using the 7 button on the unit.
●When the recording capacity becomes full during timer recording or Instant Timer Recording, the unit is automatically shut off.
7
1 2 3
4 | 5 | 6 |
7 8 9
0
DISPLAY
REMAIN |
|
TV/VCR | CH +/– |
|
While recording is going on, you can watch another program on the TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV in advance. ( pg. 70)
1 During recording, press TV/VCR to select TV mode if your unit is connected to the TV via the RF connection.
●VCR mode is disengaged, then the VCR indicator lights off and “TV” appears on the front display panel.
VCR indicator lights off.
●The program received on the TV’s tuner is displayed on the TV screen.
2Slide the TV/CABLE/DBS/DVD switch to TV.
3Press CH +/– repeatedly to select the desired channel.
Elapsed Recording Time And Disc Remaining Time IndicationDuring recording, press DISPLAY repeatedly until the desired indication appears on the front display panel.
●Each time you press DISPLAY, the time indication changes as follows:
Elapsed recording time ] Disc remaining time ] Clock ] (Back to the beginning)
●There is another way to check the disc remaining time. While the unit is stopped or recording is in progress, press REMAIN. The list of disc remaining times for all recording modes appears on the TV screen.