MAIN MENU
PICTURE FUNCTION
Setting for the picture quality
Item |
|
| To do | Setting value | |
APERTURE*1 |
|
| Activates/deactivates the function at the level set in “APERTURE LEVEL.” | OFF, ON | |
APERTURE LEVEL*1 | Compensate the frequency response of the luminance signal of the video signal. | 01 – 10 | |||
CTI |
|
| Adjust the clearness of the outlines of the chrominance signal. | OFF, NORMAL, HARD | |
LTI |
|
| Adjust the clearness of the outlines of the luminance signal. | OFF, NORMAL, HARD | |
I/P MODE |
|
| Selects a proper mode corresponding to the input picture. | NORMAL, CINEMA, FIELD | |
sub menu |
|
| Display the sub menu which enables you to adjust the items of “PICTURE FUNCTION” while viewing the actual picture. | ||
reset |
|
| Restore the default settings for all the items in “PICTURE FUNCTION.” |
| |
*1 Memorized for each input. |
| ||||
|
|
| |||
BACK LIGHT | Setting value: |
| |||
Adjusts the brightness of the display. |
| ||||
• Adjust according to the ambient light conditions. |
| ||||
|
|
| |||
ASPECT |
| Setting value: 4:3, 16:9 |
| ||
Sets the aspect ratio (horizontal to vertical ratio of the screen) of the SD signal.
•Not activate when picture is displayed in the 1:1 mode.
SD4:3 SIZE Setting value: NORMAL, H FULL, V FULL*1
Selects the picture size when the input signal format is 4:3. NORMAL: Matches the vertical picture size to the number of pixels.
H FULL: Matches the horizontal picture size to the horizontal size of the screen. At this time, the top and bottom of the picture are overscanned.
V FULL: Matches the vertical picture size to the vertical size of the screen.
•Not activate when picture is displayed in the 1:1 mode.
*1
MARKER*1*2
Settings for marker functions 1/2
Item | To do |
| Setting value |
AREA MARKER*3 | Activate/deactivate the area marker and select the style of it. | OFF, LINE, HALF, HALF+L, BLK. , | |
| The setting values and features are as follows. | BLK.+L | |
| OFF: | Deactivate the marker. |
|
| LINE: | Displays the area with an outline. |
|
| HALF: | The area outside the specified aspect ratio of the screen is |
|
|
| displayed at 50% transparency. |
|
| HALF+L: The area of the specified aspect ratio of the screen is indicated |
| |
|
| by an outline, and the area outside of that is displayed at 50% |
|
|
| transparency. |
|
| BLK.: | The area outside the specified aspect ratio of the screen is black. |
|
|
| Only the portion of the picture within the designated area is displayed. |
|
| BLK. +L: The area of the specified aspect ratio of the screen is indicated by |
| |
|
| an outline, and the area outside of that becomes black so that only |
|
|
| the area inside the line is displayed. |
|
MARKER ASPECT*3 | Select the aspect ratio of the area marker. | 4:3, 14:9, 13:9, 2.35:1, 1.85:1, 1.66:1 | |
SAFETY MARKER | Activate/deactivate the safety marker and select the style of it.*4 | OFF, LINE, HALF, HALF+L, BLK. , | |
|
|
| BLK.+L |
SAFETY AREA | Adjust the area of the safety marker. | 80% – 100% | |
FRAME | Displays/hides the frame indicating the area of the specified aspect ratio. | OFF, ON | |
CENTER MARKER | Displays/hides the marker indicating the center position of the picture. | OFF, ON | |
LINE BRIGHTNESS | Adjust the brightness of the marker. | HIGH, LOW | |
•The area marker or the safety marker is displayed by using AREA MARKER or SAFETY MARKER button, or external control.
•Select either
•When a picture is displayed in 4:3 aspect ratio, the safety marker for the 4:3 area is displayed.
•To display the safety marker for the area of a picture displayed in 16:9 aspect ratio, hide the area marker.
*1 Memorized for each input.
*2 Not displayed when the picture is displayed in the 1:1 mode and when “SD4:3 SIZE” setting in MAIN MENU is “H FULL” and the input signal format is 4:3.
*3 Displayed only when picture is displayed in 16:9 aspect ratio.
*4 The setting values are the same as that of “AREA MARKER”.
13