INFORMATION

Settings for the information display of the monitor

Item

To do

Setting value

POSITION

Select the position to show the information display (☞ “On the Information

UPPER, LOWER

 

Display” on page 11).

 

SOURCE ID

Select whether the name assigned in “CHARACTER SET.” is displayed on the

OFF, ON, AUTO

 

screen (☞ “On the Information Display” on page 11).

 

 

• When “AUTO” is selected, the display color synchronizes with the color of

 

 

the tally lamp while the tally lamp is lit.

 

CHARACTER SET.*1

Assign a name to each video source as you like (10 characters at maximum).

 

 

You can also enter a name using the RS-232C system.

 

Setting of “CHARACTER SET.”

1Change the input to one that you want to assign a video source name for.

2 Select “CHARACTER SET.”

3Press buttons to select the first character.

•Each time you press button, the character changes as follows. Press button to reverse the order.

Space

 

 

4 Press button to move the arrow to the next space.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The characters entered before moving the arrow are memorized.

 

 

 

 

 

 

 

 

 

5 Repeat steps 3 and 4 (10 characters at maximum).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 Press MENU button to store the name.

 

 

 

 

 

 

 

STATUS DISPLAY

Select whether the status of the current input and the setting of MUTING are

AUTO, OFF, ON

 

 

displayed on the screen (☞ “On the Status Display” on page 11).

 

 

 

 

 

 

 

TIME CODE

Select the type of the TIME CODE display.

VITC*2, LTC*2, D-VITC

CRC ERROR

Select whether the CRC error indication for the input HD SDI signal is

OFF, ON

 

 

displayed on the screen (☞ “On the Information Display” on page 11).

 

 

 

 

 

 

 

SUB HOUR METER

Display the hours of use (unit: hour). You can reset this item.

 

 

 

 

 

 

 

MODEL

Display the model name of the monitor.

 

 

 

 

 

 

 

VERSION

Display the version of the monitor.

 

 

 

 

 

 

 

HOUR METER

Display the total hours of use (unit: hour). This item is used for maintenance of the monitor. You cannot reset this

 

 

item.

 

 

 

 

 

 

 

*1 Memorized for each input.

 

 

 

 

 

 

 

*2 Ancillary time code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTROL LOCK

 

Setting value: OFF, VOL.LOCK, ALL LOCK

 

 

 

 

 

 

 

Settings for disabling the buttons on the front panel.

•The following operations are not available when “VOL.LOCK” is selected.

–VOLUME adjustment knob

–Picture adjustment knob

•The “ALL LOCK” function disables to control the buttons on the front panel. But following operations are available.

–Turning on/off (on standby) the monitor

–Displaying the SET-UP MENU (by pressing button while holding button) and turning “CONTROL LOCK” to “OFF”

–Operating the monitor by an external control

If you try other operations, “ Control lock on!” appears on the screen.

DVI INPUT SEL. Setting value: AUTO, COMPO., RGB, PC

When “AUTO” is selected, the format of signals come in to the DVI-D (HDCP) terminal is automatically recognized. (Normally, select “AUTO.”)

•Select “COMPO.,” “RGB” or “PC” when the picture is not displayed correctly with “AUTO.”

•DVI-D input of the monitor is compatible with HDCP.

all reset

Restores all the settings and adjustments of the monitor to the default.

•“HOUR METER” and the settings done by using the adjustment knobs on the front panel will not be reset.

•After performing “all reset,” the monitor is turned off then turned on automatically.

17