Connections

„Rear panel

DT-R24L41D

DT-R17L4D

The illustration of the monitor is of DT-R24L41D.

DT-R24L41D

DT-R17L4D

Security slot

Attach a security wire to this slot.

1POWER switch

Turns AC power on or off.

• You need to press button (☞ t on page 10) to use the monitor after turning on the POWER switch.

2AC IN terminal

AC power input connector.

Connect the provided AC power cord to an AC outlet.

•Attach the provided power cord holder to prevent accidental disconnection of the AC power cord (☞ “Attaching the power cord holder” on page 9).

CAUTION

Do not connect the power cord until all other connections are completed.

3REMOTE terminal

Terminal for controlling the monitor by an external control (☞ “External Control” on page 18).

4For DT-R24L41D: VIDEO (INPUT 1/INPUT 2) terminals (BNC) / For DT-R17L4D: VIDEO terminals (BNC) Input (IN) and output (OUT) terminals for the composite signals.

5For DT-R24L41D: AUDIO ASSIGN (IN 1/IN 2) terminals (pin jack) / For DT-R17L4D: AUDIO (IN) terminals (pin jack) Input terminals for the analog audio signals.

•Use this terminal for the analog audio connection of the SDI. When a superimposed signal (EMBEDDED AUDIO signal on an SDI signal) is input, analog audio signals cannot be input.

•For DT-R24L41D: Select the video input to assign the audio signal in “AUDIO1 ASSIGN.” or “AUDIO2 ASSIGN.” (☞ “AUDIO SETTING” on page 14).

8