SYNC FUNCTION

Settings for the synchronization with signals

Item

To do

Setting value

NO SYNC ACTION

Select the screen status when no signal is coming in.

OFF, P.SAVE, GRAY B.

 

P.SAVE: power save mode

 

 

GRAY B.: gray screen

 

DELAY TIME

Select the period until the screen status changes as selected in “NO SYNC

30sec., 5min., 15min.

 

ACTION” after signals stop coming in.

 

LOW LATENCY

Activates/deactivates the function to shorten the time taken to display the

ON, OFF

 

picture (low latency function).

 

 

• If the picture is not displayed steadily while “ON” is selected, select “OFF.”

 

 

• While “ON” is selected, the displayed picture may become unstable when

 

 

an operation using buttons on the front panel or the menu is performed, or

 

 

when the signal format changes.

 

•When setting “NO SYNC ACTION” to “GRAY B.,” the screen color changes to gray and the power consumption of the back light is saved by half. Selecting “P.SAVE” (power save mode) saves more power consumption by turning off the back light.

•In the initial setting, “NO SYNC ACTION” is set to “P.SAVE”, and “DELAY TIME” set to “15min.” Change the settings if necessary.

„SET-UP MENU

FUNCTION SETTING

Settings for the sub menu display, color system, color of the tally lamp, picture size, intensity of the button lamps and the PHASE adjustment.

Item

To do

 

Setting value

sub menu POSI.

Select the contents and displaying position of “sub menu.”

LOWER1, UPPER1, LOWER2,

 

The setting values and features are as follows.

UPPER2

 

LOWER1:

Displays the current setting and adjustment bar at the lower part

 

 

 

of the screen.

 

 

UPPER1:

Displays the current setting and adjustment bar at the upper

 

 

 

part of the screen.

 

 

LOWER2:

Displays the current setting at the lower part of the screen.

 

 

UPPER2:

Displays the current setting at the upper part of the screen.

 

 

• The adjustment bar is not displayed for some items.

 

COLOR SYSTEM

Select the color system.

AUTO, NTSC, PAL

 

• If the picture is unstable with “AUTO,” select “NTSC” or “PAL.”

 

TALLY SELECT

Select the color of the tally lamp.

GREEN, RED

DIMMER

Select the intensity of the button lamps.

NORMAL, DARK

COMPONENT PHASE

Deactivates the function of PHASE adjustment (Picture adjustment knob

ENABLE, DISABLE

 

and “PICTURE SUB ADJ.” in SET-UP MENU) except when an NTSC signal

 

 

comes in (☞ 3 on page 10).

 

PICTURE SUB ADJ.

Adjusts the standard level for the picture adjustment and selects the set-up level for the input video signal.

Item

To do

Setting value

CONTRAST*1

Adjust the standard level for the contrast adjusted with the CONTRAST knob

–20 – +20

 

on the front panel.

 

BRIGHT*1

Adjust the standard level for the brightness adjusted with the BRIGHT knob on

–20 – +20

 

the front panel.

 

CHROMA*1

Adjust the standard level for the chroma adjusted with the CHROMA knob on

–20 – +20

 

the front panel.

 

PHASE*1, *2

Adjust the standard level for the phase adjusted with the PHASE knob on the

–20 – +20

 

front panel.

 

NTSC SETUP

Select the set-up level of the input NTSC signal.

00, 7.5

 

00: compliant with 0% set-up signal

 

 

7.5: compliant with 7.5% set-up signal

 

sub menu

Display the sub menu which enables you to adjust the items in “PICTURE SUB ADJ.” while viewing the actual

 

picture.

 

reset

Restore the default settings for all the items in “PICTURE SUB ADJ.”

 

*1 Memorized for each input.

*2 When “COMPONENT PHASE” is set to “DISABLE” and an NTSC signal is input, PHASE can be adjusted.

15