Menu Configuration—MAIN MENU

For the operation procedure, see page 7.

Operation guide

Shows the buttons for each operation.

The menu automatically disappears in about 30 seconds after the previous operation.

Some items may not appear on the menu depending on the input or the input signal.

The items controlled by the MAKE system do not appear on the menu.

10

PICTURE FUNCTION

Setting for the picture quality

Item

 

To do

Setting value

MOVING

 

Reduce the lag of moving pictures which is peculiar to LCD.

OFF, ON

PICTURE*1

 

 

 

APERTURE

 

Select the frequency of the luminance signal compensated in

OFF, LOW, HIGH

FREQ.*2

 

“APERTURE LEVEL.”

 

APERTURE

 

Compensate the frequency response of the luminance signal of the

01 – 10

LEVEL*2

 

video signal.

 

CTI

 

Adjust the clearness of the outlines of the chrominance signal.

OFF, NORMAL, HARD

LTI

 

Adjust the clearness of the outlines of the luminance signal.

OFF, NORMAL, HARD

I/P MODE

 

Selects a proper mode corresponding to the input picture.

NORMAL, CINEMA,

 

 

 

FIELD

sub menu

 

Display the sub menu which enables you to adjust the items of “PICTURE FUNCTION” while

 

 

viewing the actual picture.

 

reset

 

Restore the default settings for all the items in “PICTURE FUNCTION.”

 

*1 DT-V24L3DY only

 

*2 Memorized for each input.

 

 

Setting value: –20 – +20

 

BACK LIGHT

 

Adjusts the brightness of the display.

DVI INPUT SEL. Setting value: AUTO, MODE1, MODE2, MODE3

When “AUTO” is selected, the format of signals come in to the DVI-D (HDCP) terminal is automatically recognized. (Normally, select “AUTO.”)

Select “MODE1”, “MODE2” or “MODE3” when the picture is not displayed correctly with “AUTO.”

DVI-D input of the monitor is compatible with HDCP.

COMPO./RGB SEL. Setting value: COMPO. (component), RGB

Selects the signal type you want to use for COMPO./RGB terminals.

Page 10
Image 10
JVC DT-V24L3DY, DT-V20L3DY Menu Configuration-MAIN Menu, Picture Function, Operation guide, Setting value -20 +20