JVC E9770ED/1VMN VCR Functions, Playback, Recording and One-Touch Timer Recording OTR, 64 EN

VCR Functions

Playback

VCR

1 Press [STANDBY/ON /I] to turn on the unit.

To play back a tape, turn on the TV and be sure to select the input to which the unit is connected.

2 Press [VCR].

3 Insert a prerecorded tape, then press [PLAY P] to begin playback.

4 During playback, press [PAUSE p].

Playback will be paused and sound will be muted.

5 Press [PLAY P] to resume playback.

6 Press [STOP S] to stop playback.

7 Press [VCR STOP/EJECT S/O] on the unit to eject the tape.

Note

•When a tape without record tab is inserted, the unit will start playback automatically.

•Tracking will be automatically adjusted upon playback. To adjust the tracking manually, press

[PR +/-].

VCR Functions

Recording and One-Touch Timer Recording (OTR)

Basic Recording

VCR

Before recording, make sure:

•The desired channel is selected by pressing the number buttons on the remote control.

•There is a tape with a record tab in the unit.

•The desired recording speed is selected in SP (standard play) or LP (long play) mode by pressing [REC SPEED] on the remote control.

Tape speed	Recording / Playback Time
Type of tape	E60	E120	E180
SP mode	1 hour	2 hours	3 hours
LP mode	2 hours	4 hours	6 hours

• Refer to page 29 for instructions on timer recording.

1 Turn on the unit and insert a recordable tape.

Make sure that the TV input is set on the unit.

2 Press [VCR].

3 Select the recording speed using [REC SPEED].

•The desired recording speed is selected in SP (standard play) or LP (long play) mode by pressing [REC SPEED].

4 Select the desired channel to record using [PR +/-] or [the Number buttons].

5 Press [VCR REC I] to start recording.

To temporarily stop recording or to resume it, press [PAUSE p]. After the unit has been in pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.

6 Press [STOP S] when the recording is completed.

64 EN