Sleep Timer, Add Channel, Delete Channel

Partial Scan Channels

You can partially scan for network signal within a speciange of channels.

1Press MENU.

2	Press	or	to select “Partial Channel Scan”, then press or OK.
3	Press	or	to select “Scan Mode”, then press or OK.

4Press or to select an option, then press OK.

t“Analog/Digital”: scan for both analog and digital channels

t“Analog”: scan for analog channels

t“Digital”: scan for digital channels

5	Press	or	to select “From Channel”, then enter a starting channel range.
6	Press	or	to select “To Channel”, then enter an ending channel range.
7	Press	or	to select “Start Scan”, then press OK.

Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK.

New channels may be added to your area periodically. Use the Add Channel function to add new channels.

1Press MENU.

2	Press	or	to select “Channel”, then press or OK.
3	Press	or	to select “Find Channel”, then press or OK.
4	Press	or	to select “Enter Channel”, then enter a channel.

5Press to select “Add Channel”, then press OK. Added channels are listed on the Channel List screen.

To remove a channel from the Channel List screen.

1Press MENU.

2	Press	or	to select “Channel”, then press or OK.
3	Press	or	to select “Channel Management”, then press or OK.

4Press or , then press OK to mark the channels that you want to remove from the Channel List.

5Press RETURN to close the menu screen.

Sleep timer sets the TV to automatically turn oter a preset amount of time. See page 21.