JVC FS-A52 manual Connecting Other Equipment, NOW, you can plug the AC power cord

Connecting Other Equipment

You can connect both of the analog and digital equipment. When you connect and use the equipment, refer also to its manual supplied.

•DO NOT connect other equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

To connect analog audio equipment

Be sure that the plugs of the audio cords and the jacks on the rear of the unit are color-coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

	LINE IN
	(AUX)
R	L
SPEAKER IMPEDANCE
MIN 4
R	L
AC IN
Analog audio
equipment
	To output

To connect audio equipment with an optical digital input terminal

You can record CD sound onto the connected digital equipment.

Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the OPTICAL DIGITAL OUT terminal.

OPTICAL DIGITAL OUT	Protective cap
terminal

Before connecting the other equipment, remove the protective cap from the terminal.

Audio equipment with an optical digital input

NOW, you can plug the AC power cord.

IMPORTANT: Be sure to check all connections to be done before plugging the AC power cord into a wall outlet.

SPEAKER IMPEDANCE

MIN 4

RL

AC power cord (supplied)

AC IN

1 To the AC IN terminal

2 To a wall outlet

For playing the other equipment through this unit,	When connecting the AC power cord into a wall outlet, the
connect between the audio output jacks on the other	unit automatically starts the display illumination.
equipment and the LINE IN (AUX) jacks by using an audio
cord (not supplied.)	To stop and cancel the display demonstration, press
	COLOR during display illumination—while the unit is
	turned off (on standby.)
	To start the display illumination manually, press
	COLOR again while the unit is turned off (on standby.)

– 9 –