[Back] [Next]
GETTING STARTED Be sure to insert the (AA-size Alkaline) batteries before trying to capture images with your camera.
Inserting the Batteries zPlease ensure that the batteries are inserted in the correct way. Do not reverse the and polarities.
zThe recommended battery type is AA size ALKALINE.
zNever use manganese batteries.
zLow temperatures (under 0°C or 32°F) will reduce the output efficiency of the batteries, thereby shortening the
operation time of the camera.
zThe use of Flash is not recommended when the battery level is low.
zNever mix old and new batteries.
zRemove the batteries if the camera is not to be used for an extended period of time, to prevent leaks or corrosion.
zBefore discarding batteries, cover the positive and negative terminals with adhesive tape.
zThe Battery Indicator reflects the level of remaining battery power. When the indicator appears as shown above, the
batteries are weak and need to be replaced.
Attaching the Hand Strap or Neck Strap Always use the provided hand strap or neck strap when carrying the camera. Please note that the company cannot be
held responsible for any accidental drop of the camera due to improper use of the hand strap or neck strap.
To attach the strap to
y
our camera:
1. Slide the Battery/Memory card compartment door (located on the right
side of the camera) in the direction indicated by the arrow to open it.
2
. Insert the AA-size batteries as indicated on the inner side of the door.
3
. Close back the door and turn on the camera.
Checking Batteries( : Full battery power)
The Battery Indicator will be displayed on the status LCD monitor while the
camera is on. Depending on the durability and usage of the batteries, the
number of pictures that can be recorded varies. Note that power is
consumed by the following operations even when not recording, reducing
the number of images that can be recorded.
zExtensive use of the LCD monitor in the Play/Erase mode.
zPerforming settings.