JVC GD-V502PCE manual Sync, Freq. kHz/V-Freq. Hz, Setting RGB sync signal

Setup for input signals

Sync

Select Signal from the “Setup” menu during RGB input signal.

Press to adjust.

R

Press to exit from adjust mode.

Setup	1/2
Component/RGB-in select	RGB
Input label	RGB1
Signal
Screensaver
Power save	Off
Standby save	On
Power management	Off
OSD Language	English (UK)

Press (ACTION) button

Signal		[	RGB	]
Sync		H & V
H-Freq.	31.5	kHz
V-Freq.	60.0	Hz

Setting RGB sync signal:

Confirm that the input is set to RGB input (this setting is valid only for RGB input signal).

H & V:	The H and V sync signals are input from the HD/VD connector.
on G:	Uses a synchronized signal on the Video G signal, which is input
	from the G connector.
CS:	Uses a synchronized signal of Composite Sync input.

Sync	H & V
Sync	on G

SyncCS

H-Freq. (kHz)/V-Freq. (Hz)

Displays the H (Horizontal)/V (Vertical) frequencies.

This display is valid only for RGB input and PC input signal.

Display range:
Horizontal	15	- 110 kHz
Vertical	48	- 120 Hz

H-Freq. V-Freq.

31.5kHz

60.0Hz

32