JVC GET0070-001A Prohibiting cassette ejection, To play back tapes recorded with the Dolby B NR

ENGLISH

To play back tapes recorded with the Dolby B NR*

1 Press MODE to enter the functions mode while listening to a tape.

“MODE” flashes on the lower part of the display, and the number buttons work as different function buttons.

2 Press (Dolby B), while “MODE” flashes on

the display so that the (Dolby B) indicator

lights up.

“DOLBY B” appears on the display for several seconds.

To cancel the Dolby B NR, repeat steps 1 and 2 above again.

*Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Finding the beginning of a tune

Multi Music Scan allows you to automatically start playback from the beginning of a specified tune. You can specify up to 9 tunes ahead of or before the current tune.

During playback

Specify where (how many tunes ahead of or before the current tune) the tune you want is located.

Press ¢ to locate a tune ahead of the current tune on the cassette.

Press 4 to locate a tune before the current tune on the cassette.

Prohibiting cassette ejection

You can prohibit cassette ejection and “lock” a cassette in the cassette compartment.

Press and hold TAPE CD-CH and for more than 2 seconds.

“NO EJECT” flashes on the display for about 5 seconds, and the cassette is “locked.”

To cancel the prohibition and “unlock” the

cassette, press and hold TAPE CD-CH

and for more than 2 seconds again. “EJECT OK” flashes for about 5 seconds, and this time the cassette is “unlocked.”

Note:

If you press 0while cassette ejection is prohibited, the control panel opens, but the cassette continues to play and cannot be ejected.

Each time you press the buttons, the number changes up to ±9.

When the beginning of the specified tune is located, playback starts automatically.

Notes:

•While locating a specified tune:

–If the tape is rewound to its beginning, playback starts from the beginning of that side.

–If the tape is fast-forwarded to the end, it is reversed and played from the beginning of the other side.

•In the following cases, the Multi Music Scan function may not operate correctly:

–Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions between tunes.

–Tapes with short non-recorded sections.

–Tapes with high level of noise or humming between tunes.

–The Dolby NR setting does not match. For example, if Dolby B NR is on and the tape was recorded with no Dolby NR.

–Tapes with tunes recorded at low recording levels.

20