16
ENGLISH
Other convenient RDS functionsand adjustments

Automatic selection of the station

when using the number buttons

Usually when you press the number button, the
preset station is tuned in.
However, when the preset station is an RDS station,
something different will happen. If the signals from
that preset station are not sufficient for good
reception, this unit, using the AF data, tunes in to
another frequency broadcasting the same
programme as the original preset station is
broadcasting. (Programme search)
• The unit takes some time to tune in to another
station using Programme search.
To activate programme search, follow the procedure
below.
• See also “Changing the general settings (PSM)”
on page 25.
1Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2Press ¢ or 4 to select
“P(Programme)-SEARCH.”
3Turn the control dial clockwise to select “ON.”
Now programme search is activated.
4Press SEL (select) to finish the setting.
To cancel programme search, repeat the
same procedure and select “OFF” in step 3 by
turning the control dial counterclockwise.

To search your favourite programme type

1
Press and hold TP PTY for more than
2 seconds while listening to an FM
station.
2
Select one of the PTY codes.
3
Press ¢ or 4 to start PTY
search for your favourite programme.
• If there is a station broadcasting a programme of
the same PTY code as you selected, that station
is tuned in.
• If there is no station broadcasting a programme
of the same PTY code as you selected, the
station will not change.
Note:
In some areas, the PTY search will not work correctly.
OR
TP
PTY
The last selected PTY code appears.
EQ
Ex.:When “ROCK M” is selected
EN12_18KSFX925R[EE]f.pm5 4/03/2002, 10:38 AM16