To set the Custom Equalizer Link– CEQ LINK
A different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources.
When shipped from the factory, this mode is deactivated.
•LINK ON: Different sound modes for different sources.
•LINK OFF: One sound mode for all sources.
To set the clock display – CLOCK
You can set the clock to be shown on the display when the unit is turned on.
When shipped from the factory, the clock is set to be shown on the display.
• ON: | Clock display is turned on. |
• OFF: | Clock display is turned off. When |
| “OFF” is selected, the current |
| source name or station band |
| appears instead of the clock display |
| (except when “LINE IN” is selected |
| as the source). |
To select the level meter – LEVEL
You can select the level display according to your preference.
When shipped from the factory, “AUDIO 2” is selected.
•AUDIO 1: Level meter illuminates from bottom to top.
•AUDIO 2: Alternates level meter (moves from bottom to top) and illumination
| display. |
• OFF: | Erases the audio level meter. |
To select the dimmer mode – DIMMER
When you turn on the car head lights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer mode is activated.
•AUTO: Activates Auto Dimmer.
•OFF: Cancels Auto Dimmer.
• ON: | Always dims the display. |
Note:
Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.”
To select the telephone muting – TEL
This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2,” whichever mutes the sounds from this unit.
When shipped from the factory, this mode is deactivated.
•MUTING 1: Select this if this setting can mute the sounds.
•MUTING 2: Select this if this setting can mute
| the sounds. |
• OFF: | Cancels the telephone muting. |
To turn on/off the key-touch tone – BEEP
You can deactivate the
• ON: | Activates the |
• OFF: | Deactivates the |
To select the external component to use
–EXT IN
You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor
To use the external component as the playback source through this unit, you need to select which component – CD changer or external component
– to use.
When shipped from the factory, CD changer is selected as the external component.
• LINE IN: To use the external component other than CD changer.
• CHANGER: To use the CD changer.
Note:
For connecting the Line Input Adaptor
external component, refer to the Installation/Connection Manual (separate volume).
ENGLISH
27
