Specifications, FM Tuner, MW Tuner, LW Tuner | JVC 0302KKSMDTJEIN

2.0 V/20 kΩ load

(250 nWb/m)

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front:	50 W per channel
Rear:	50 W per channel
Continuous Power Output (RMS):
Front:	19 W per channel into 4 Ω, 40 Hz
	to 20 000 Hz at no more than
	0.8% total harmonic distortion.
Rear:	19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range:

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

TUNER SECTION

Frequency Range:
FM1/FM2:	87.5 MHz to 108.0 MHz
FM3:	65 MHz to 74 MHz
AM:	(MW) 522 kHz to 1 620 kHz
	(LW) 144 kHz to 279 kHz

CASSETTE DECK SECTION

Wow & Flutter: 0.11% (WRMS)

Fast-Wind Time: 100 sec. (C-60) Frequency Response (Dolby B NR OFF):

30 Hz to 16 000 Hz (Normal tape)

Signal-to-Noise Ratio: (Normal tape):

(Dolby B NR ON): 65 dB

(Dolby B NR OFF): 56 dB

Stereo Separation: 40 dB

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C Dimensions (W × H × D):

Installation Size: 182 mm × 52 mm × 150 mm

Panel Size: 188 mm × 58 mm × 14 mm

Mass: 1.3 kg (excluding accessories)

Design and specifications subject to change without notice.

ENGLISH

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 μV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 μV

39

Image 39

JVC 0302KKSMDTJEIN, GET0070-001A manual Specifications, FM Tuner, MW Tuner, LW Tuner

Contents

GET0070-001A EE KS-FX925R How to use the Mode button How to reset your unit Contents Disp display button Location of the ButtonsControl panel Display window Remove the battery holder Installing the batteryPlace the battery Return the battery holder RM-RK50 Remote controller Turning on the power To drop the volume in a momentTo turn off the power Radio Operations Listening to the radioSearching a station automatically Auto search When an FM stereo broadcast is hard to receive Searching a station manually Manual searchTune in to a station you want while Manu is flashing FM station automatic preset SSM Manual presetFM1 FM2 Have not stored them yet, see Storing stations Tuning in to a preset station RDS Operations What you can do with RDSTo use Network-Tracking Reception To deactivate the TA Standby Reception, press Using TA Standby Reception To deactivate the PTY Standby Reception Using PTY Standby Reception Memory and the selected code name Searching your favourite programmeTo store your favourite programme types Station To search your favourite programme type Press and hold TP PTY for more thanSelect one of the PTY codes Setting the TA volume level Automatic clock adjustmentChanging the display mode while listening to an FM station PTY codes To fast-forward and rewind a tape Tape OperationsListening to a cassette To stop play and eject the cassette To play back tapes recorded with the Dolby B NR To cancel the Dolby B NR, repeat steps 1 and 2 above againTo cancel the prohibition and unlock Prohibiting cassette ejection Now Blank Skip is Activated To cancel Blank Skip, repeat the samePlaying the current tune repeatedly Skipping the blank portions on the tape Adjusting the sound Sound Adjustments Select the sound mode you want Selecting preset sound modes C-EQ custom equalizerPress Mode Press EQ equalizer while Mode flashes on the display To reset to the factory settings, repeat Storing your own sound adjustmentsWhen CEQ Link is set to Link on When CEQ Link is set to Link OFF Other Main Functions Setting the clockChanging the general settings PSM Basic Procedure 24H/12H Preferred Setting Mode PSM items To select the telephone muting TEL To select the dimmer mode DimmerTo set the clock display Clock To select the level meter Level Detaching the control panel Attaching the control panelUnlock the control panel To go to the next or previous tracks CD Changer OperationsPlaying CDs To fast-forward or reverse the track RPT1 RPT2 To go to the next or previous discsTo go to a particular disc directly RND1 RND2 Adjust the sound characteristics you want. See pages 22 Playing an external component Note on One-Touch OperationLine Before you start What is DAB system?Select the DAB tuner Select the DAB band DAB1, DAB2 or DAB3 To restore the FM/AM tuner Tuning in to an ensemble Select the DAB band DAB1, DAB2 or DAB3 you want Storing DAB services in memory To use the Alternative Reception DAB AF Tuning in to a preset DAB serviceSelect the number 1 6 for the preset DAB service you want While receiving a DAB service Symptoms Causes Remedies Troubleshooting Reset button of the CD changer When connecting to the CD changer Ignition key-off release/Ignition key-on play MaintenanceTo clean the head To keep the tape clean LW Tuner SpecificationsFM Tuner MW Tuner Having Trouble with operation? Please reset your unit