16
ENGLISH
Other convenient RDS functionsand adjustments

Changing the display mode while

listening to an FM station

You can change the initial indication on the display
to station name (PS NAME) or station frequency
(FREQ) while listening to an FM RDS station.
• See also “Changing the general settings (PSM)”
on pages 32 and 33.
1Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2Press ¢ or 4 to select “TU DISP
(tuner display).”
3Turn the control dial to set to the desired indication
(“PS NAME” or “FREQ”).
4Press SEL (select) to finish the setting.
Note:
By pressing DISP (D), you can change the display while
listening to an FM RDS station.
Each time you press the button, the following information
appears on the display:
•Then, the display goes back to the original indication
in several seconds.

To search your favourite programme type

1
Press and hold TP/PTY (T) for more
than 2 seconds while listening to an
FM station.
2
Select one of the PTY codes.
Ex.:When “ROCK M” is selected
The last selected PTY code appears.
OR
3
Press ¢ or 4 to start PTY
search for your favourite programme.
• If there is a station broadcasting a programme of
the same PTY code as you selected, that station
is tuned in.
• If there is no station broadcasting a programme
of the same PTY code as you selected, the
station will not change.
Note:
In some areas, the PTY search will not work correctly.
Station name
(PS NAME)
Station frequency
(FREQ)
Programme type
(PTY)
EN12-18KD-LH7R_LH5R[E]f.pm5 1/18/02, 1:49 PM16