ENGLISH
Storing DAB services in memory
You can preset up to 6 DAB services in each DAB band (DAB1, DAB2 and DAB3) manually.
1 Select the DAB tuner.
Each time you press and hold the button, the DAB tuner and the FM/AM tuner are alternately selected.
DAB 
FM/AM
2 Select the DAB band (DAB1, DAB2 or DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
| D1 |
| D2 |
| D3 |
|
|
|
|
| |||
| (DAB 1) |
| (DAB 2) |
| (DAB 3) | |
|
|
|
|
|
|
|
3 Tune in to an ensemble you want.
4 Select a service of the ensemble you want.
Press 5 (up) to select the next service.
Press ° (down) to select the previous service.
5 Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds.
Selected band/preset number and “MEMO” (memory) appear alternately for a while.
6 Repeat the above procedure to store other DAB services into other preset numbers.
Notes:
•A previously preset DAB service is erased when a new DAB service is stored in the same preset number.
•Preset DAB services are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the DAB services again.
Tuning in to a preset DAB service
You can easily tune in to a preset DAB service. Remember that you must store services first. If you have not stored them yet, see the column on the left.
1 Select the DAB tuner.
Each time you press and hold the button, the DAB tuner and the FM/AM tuner are alternately selected.
DAB 
FM/AM
44
