ENGLISH
Assigning names to the sources
This section is only for KD-LH7R.
You can assign names to discs (both in this unit and in the CD changer).
After assigning a name, it will appear on the display when you select the source.
Sources | Maximum number of |
| characters |
|
|
CDs* | up to 32 characters |
| (up to 40 discs) |
*You cannot assign a name to a CD Text or an MP3 disc.
1Select a source you want to assign a name to.
When you select a source, the power automatically
comes on.
2 Press and hold SEL (select) for more than 2 seconds while pressing DISP (D).
Ex.: When you select CD as the source
3 Select a character.
• See next column for available characters.
4 Move the cursor to the next (or previous) character position.
5 Repeat steps 3 and 4 until you finish inputting the name.
6 Finish the procedure while the last selected character is flashing.
To erase the input characters
Insert spaces using the same procedure described above.
Available characters
A | B | C | D | E | F | G | H | I | J |
|
|
|
|
|
|
|
|
|
|
K | L | M | N | O | P | Q | R | S | T |
U | V | W | X | Y | Z | 0 | 1 | 2 | 3 |
|
|
|
|
|
|
|
|
|
|
4 | 5 | 6 | 7 | 8 | 9 | – | / | < | > |
space
Notes:
•When you try to assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.)
•When the CD changer is connected, you can assign names to CDs in the CD changer. These names can also be shown on the display if you insert the CDs in this unit.
•These characters are also used while showing ID3 tags of the MP3 disc.
Some characters or symbols will not be shown (and be blanked) on the display.
(Ex. “ABCå!d#” ]“ABCA D ”)
36
