BASIC OPERATIONS
1 3 2
Turning on the power | 3 Adjust the volume. |
1 Turn on the power. | To increase the volume. |
| |
“HELLO” appears on the display. |
|
A | To decrease the volume. |
| |
Note on | Volume level appears |
When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
2 Select the source.
Volume or audio level indicator (see page 34)
ENGLISH
To operate the tuner (FM or AM), see pages 8 – 18.
To play a CD,
see pages 19 – 22. To play an MP3 disc,
see pages 23 – 28.
To operate the CD changer, see pages 38 – 40.
To operate the external component (LINE IN), see page 41.
To operate the DAB tuner, see pages 42 – 45.
CAUTION on Volume Setting:
Discs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.
4 Adjust the sound as you want. (See pages 29 – 31.)
To drop the volume in a moment
Press 
briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
•If you turn the control dial, you can also restore the sound.
To turn off the power
Press 
for more than one second. “SEE YOU” appears, then the unit turns off.
•If you turn off the power while listening to a disc, CD play will start from where playback has been stopped previously, next time you turn on the power.
Note:
When you use this unit for the first time, set the
7
