JVC CH-X100, GET0113-001A manual Manual preset, Tune in to a station in this example, of 88.3 MHz

ENGLISH

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band

1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).

FM1 FM2 FM3

AM

2 Tune in to a station (in this example, of 88.3 MHz).

Press ¢to tune in to stations of higher frequencies.

Press 4 to tune in to stations of lower frequencies.

4 Repeat the above procedure to store other stations into other preset numbers.

Notes:

•A previously preset station is erased when a new station is stored in the same preset number.

•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

Tuning in to a preset station

You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 7 and 8.

1 Select the band (FM1 – 3, AM).

FM1 FM2 FM3

AM

2 Select the number (1 – 6) for the preset

	station you want.
3	7	8 MO 9	10	11 RPT 12 RND
	Press and hold the number button

(in this example, 1) for more than 2 seconds.

“P 1” flashes for a few seconds.

8