JVC GET0195-001A manual Troubleshooting, Symptoms Causes Remedies, Stored in memory are erased

ENGLISH

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

		Symptoms	Causes		Remedies
	•	Sound cannot be heard	The volume level is set to the	Adjust it to the optimum level.
		from the speakers.	minimum level.
			Connections are incorrect.	Check the cords and
General				connections.
	•	at all.	have functioned incorrectly due	press		(standby/on
		This unit does not work	The built-in microcomputer may	While holding SEL (select),
			to noise, etc.	attenuator) for more than
				2 seconds to reset the unit. (The
				clock setting and preset stations
				stored in memory are erased.)
				(See page 2.)
	•	SSM (Strong-station	Signals are too weak.	Store stations manually.
FM/AM		Sequential Memory)
		automatic preset does
		not work.
	•	Static noise while	The aerial is not connected	Connect the aerial firmly.
		listening to the radio.	firmly.
	•	CD automatically ejects.	CD is inserted upside down.	Insert the CD correctly.
	•	CD-R/CD-RW cannot be	CD-R/CD-RW is not finalized.	• Insert a finalized CD-R/
		played back.		CD-RW.
	• Tracks on the CD-R/CD-			• Finalize the CD-R/CD-RW
		RW cannot be skipped.		with the component which
				you used for recording.
	• CD can be neither		CD is locked.	Unlock the CD.
		played back nor ejected.		(See page 22.)
Playback			The CD player may have	While holding
			functioned incorrectly.	(standby/on attenuator), press
				0 (eject) for more than
				2 seconds. Be careful not to
CD				drop the CD when it is ejected.
	•	CD sound is sometimes	You are driving on rough roads.	Stop playback while driving on
		interrupted.		rough roads.
			CD is scratched.	Change the CD.
			Connections are incorrect.	Check the cords and
				connections.
	•	“NO DISC” appears on	No CD in the loading slot.	Insert a CD into the loading slot.
		the display.
			CD is inserted incorrectly.	Insert the CD correctly.

36