3 Press and hold the number button (in this example, 1) for more than 2 seconds.

Preset number flashes for a while.

4 Repeat the above procedure to store other stations into other preset numbers.

Tuning in to a preset station

You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 10 and 11.

1 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as follows:

FM1 FM2 FM3 AM

2 Select the number (1 – 6) for the preset station you want.

ENGLISH

Notes:

A previously preset station is erased when a new station is stored in the same preset number.

Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

Note:

You can also use the 5(up) or (down) button on the unit to select the next or previous preset stations. Each time you press the 5(up) or (down) button, the next or previous preset station is tuned in.

11

Page 11
Image 11
JVC GET0195-001A manual Tuning in to a preset station, Preset number flashes for a while