![](/images/new-backgrounds/1296195/29619517x1.webp)
Searching for a station manually: Manual search
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
FM1
FM2
FM3
AM
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
When an FM stereo broadcast is hard to receive
1 Press MODE to enter the functions mode while listening to an FM stereo broadcast.
2 Press MO (monaural), while “MODE” is still flashing on the display, so that “MONO” appears on the display.
Each time you press the button, monaural mode turns on and off alternately.
MO (monaural) indicator
ENGLISH
2 Press and hold ¢ or
4 until “M” (manual) starts flashing on the display.
3 Tune in to a station you want while “M” (manual) is still flashing.
To tune in to stations of higher frequencies
To tune in to stations of lower frequencies
•If you release your finger from the button, the manual mode will automatically turns off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz for
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved.
9